📚 A-Level Physics Paper 1 Formula Derivations: Insights from the June 2019 Exam Report | A-Level 物理 Paper 1 公式推导：2019年6月考试报告解读
The June 2019 A-Level Physics Paper 1 examiners' report highlighted a recurring theme: many students struggled with showing clear, step‑by‑step derivations of key formulas. Instead of rote memorisation, examiners expected candidates to start from fundamental principles and apply mathematical logic to reach the required expression. This article revisits the most essential derivations that appeared or were implicitly tested in Paper 1, providing both the reasoning and the detailed steps. Mastering these derivations not only secures marks in ‘show that’ questions but deepens your understanding of the underlying physics.
2019年6月的A-Level物理Paper 1考官报告指出一个反复出现的问题：许多学生在展示关键公式的清晰、逐步推导时遇到困难。考官期待的是从基本原理出发、运用数学逻辑得出所需表达式的能力，而不是死记硬背。本文重新梳理了在Paper 1中直接出现或间接考查的最重要的推导，提供推演逻辑和详细步骤。掌握这些推导不仅能稳稳拿到“证明”类题目的分数，还能加深你对背后物理的理解。
1. Kinetic Energy from Work Done | 从功推导动能公式
When a resultant force does work on an object, the object accelerates and its kinetic energy changes. By equating the work done to the gain in kinetic energy, we can derive the familiar Eₖ = ½mv² × (v²/2) = ½mv². Since the work done is converted entirely into kinetic energy, Eₖ = ½mv².
当合力对物体做功时，物体加速，动能发生变化。通过将所做的功等于获得的动能，我们可以推导出熟悉的公式 Eₖ = ½mv²。考虑质量为 m 的物体从静止开始，在恒力 F 作用下发生位移 s。做功 W = F·s。根据牛顿第二定律 F = ma，结合运动学方程 v² = u² + 2as 并令 u = 0，得到 v² = 2as，因此 as = v²/2。代入得：W = m × (as) = m × (v²/2) = ½mv²。由于所做的功全部转化为动能，有 Eₖ = ½mv²。
2. Gravitational Potential Energy Near Earth’s Surface | 近地表面重力势能推导
istance moved in the direction of the force = mg × Δh. If we define the ground as the zero‑ ear the Earth’s surface. In exam questions, always state the assumption that g is uniform.
重力势能的变化可以通过克服重力所做的功推导出来。将质量为 m 的物体竖直举高 Δh，需要施加等于其重量 mg 的力。做功 = 力 × 沿力方向移动的距离 = mg × Δh。若定义地面为零势能参考面，则增加的重力势能为 ΔEₚ = mgΔh。该推导假设 g 为常数，这仅在地表附近成立。在答题中，一定要明确写出“假设 g 均匀”这一前提。
3. Impulse–Momentum from Newton’s Second Law | 从牛顿第二定律推导冲量-动量
cond law in its general form is F = Δp/Δt, where p = mv is momentum. To derive the impulse– = F·Δt = Δp = mv − mu. When the force varies with time, impulse is the area under a force– here increasing the collision time reduces the average force for the same momentum change.
牛顿第二定律的一般形式为 F = Δp/Δt，其中动量 p = mv。推导冲量-动量定理时，将该式改写为 Δp = F·Δt。力与时间的乘积 F·Δt 定义为冲量 J。若合力恒定，则 J = F·Δt = Δp = mv − mu。当力随时间变化时，冲量等于力–时间图下的面积。这一推导是解释安全装置（如溃缩区）的基础：在动量变化相同的情况下，延长碰撞时间可降低平均作用力。
4. Centripetal Acceleration a = v²/r | 向心加速度 a = v²/r 推导
e. Acceleration a = Δv/Δt = v·Δθ/Δt. Since angular velocity ω = Δθ/Δt = v/r, we obtain a = v·(v/r) = v²/r. Using ω = 2πf, we can also write a = rω². This derivation is purely geometric and is often examined by asking candidates to explain the direction of Δv.
一个以恒定速率 v、半径 r 做圆周运动的物体，受到指向圆心的向心加速度。考虑物体经过很小的圆心角 Δθ 从 A 点运动到 B 点，时间 Δt。对于小角度，速度变化量 Δv 的大小近似为 v·Δθ，方向指向圆心。加速度 a = Δv/Δt = v·Δθ/Δt。由于角速度 ω = Δθ/Δt = v/r，代入得 a = v·(v/r) = v²/r。再利用 ω = 2πf，也可写成 a = rω²。这一推导是纯几何的，在考试中常要求考生解释 Δv 的方向。
5. Power as the Product of Force and Velocity | 功率 = 力 × 速度 的推导
ationship is extremely useful in vehicle dynamics: a car engine providing constant power will experience a reduced driving force at higher speeds, which explains the shape of the speed–force graph.
功率定义为做功的速率。当一个恒定力 F 使物体以恒定速度 v 沿相同方向运动时，在时间间隔 Δt 内所做的功为 W = F·Δs，其中 Δs 是位移。因此，功率 P = W/Δt = F·Δs/Δt = F·v。如果力与速度不平行，则 P = F·v·cosθ。这一关系在车辆动力学中非常有用：发动机输出恒定功率时，高速下驱动力会减小，这解释了速度–力曲线的形状。
6. Combined Resistance in Series and Parallel | 串联与并联总电阻推导
ries, the current I through each is the same. The total potential difference V = V₁ + V₂ + … Using Ohm’s law, V = IR, we have IRₛₑᵣₖₑₛ = IR₁ + IR₂ + … Cancelling I gives Rₛₑᵣₖₑₛ = R₁ + R₂ + R₃ + … esistors, the p.d. across each branch is the same. The total current splits: I = I₁ + I₂ + … Using I = V/R, we get V/Rₚₐᵣₐₗₗₑₗ = V/R₁ + V/R₂ + … Cancelling V yields 1/Rₚₐᵣₐₗₗₑₗ = 1/R₁ + 1/R₂ + 1/R₃ + … ) and conservation of energy (p.d.). Examiners often ask for the physical principles used.
对于串联电阻，通过每个电阻的电流 I 相同。总电势差 V = V₁ + V₂ + … 利用欧姆定律 V = IR，得到 IRₛₑᵣₖₑₛ = IR₁ + IR₂ + … 消去 I，得出 Rₛₑᵣₖₑₛ = R₁ + R₂ + R₃ + … 对于并联电阻，各支路两端的电势差相同，总电流分流：I = I₁ + I₂ + … 利用 I = V/R 代入，得 V/Rₚₐᵣₐₗₗₑₗ = V/R₁ + V/R₂ + … 消去 V，得出 1/Rₚₐᵣₐₗₗₑₗ = 1/R₁ + 1/R₂ + 1/R₃ + … 这些推导基于电荷守恒（电流）和能量守恒（电势差）。考官经常要求写出所用的物理原理。
7. The de Broglie Wavelength | 德布罗意波长推导
th λ = h/p, where h is Planck’s constant. This can be shown by combining Einstein’s energy‑ this derivation was originally for photons, de Broglie hypothesised that the same equation applies to all matter, now confirmed by electron diffraction experiments. In Paper 1, this derivation is often assessed alongside wave–particle duality.
路易·德布罗意提出，动量为 p 的粒子具有相应的波长 λ = h/p，其中 h 为普朗克常数。可通过结合爱因斯坦的光子能量-频率关系 E = hf 与由狭义相对论导出的光子动量表达式 p = E/c 来证明。对于波，c = fλ，因此 p = hf/(fλ) = h/λ，从而得到 λ = h/p。虽然此推导原本针对光子，德布罗意假设同样的方程适用于所有物质，并已由电子衍射实验证实。在Paper 1中，这一推导常与波粒二象性一起考查。
8. Einstein’s Photoelectric Equation | 爱因斯坦光电效应方程推导
e surface. Any remaining energy becomes the electron’s maximum kinetic energy: hf = Φ + Eₖ_max. Rearranging gives Eₖ_max = hf − Φ. When hf = Φ, the frequency is the threshold frequency f₀, and Eₖ_max = 0. The derivation neatly explains the existence of a minimum frequency, the intensity independence of maximum kinetic energy, and the linear relationship between stopping potential and frequency.
光电效应方程 Eₖ_max = hf − Φ 是通过将能量守恒应用于光子吸收过程推导出来的。能量为 hf 的光子被金属中的电子吸收。其中一部分能量（逸出功 Φ）用于克服将电子束缚在表面的引力，剩余能量成为电子的最大动能：hf = Φ + Eₖ_max。移项即得 Eₖ_max = hf − Φ。当 hf = Φ 时，频率即为截止频率 f₀，此时 Eₖ_max = 0。这一推导清晰地解释了一个最小频率的存在、最大动能与光强无关、以及遏止电压与频率成线性关系。
Published by TutorHao | Physics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图