📚 Mastering OxfordAQA International AS Mathematics (9660) Pure Mathematics: Key Topic Revision | 牛津AQA国际AS数学(9660)纯数知识点精讲
This article delivers a focused revision of the core pure mathematics topics required for the OxfordAQA International AS Mathematics 9660 syllabus. We break down essential concepts, key formulas, and common problem types to help you prepare efficiently for topic tests and the final examination.
本文针对牛津AQA国际AS数学9660课程中的纯数核心主题进行集中复习。我们梳理了基本概念、关键公式和常见题型，帮助你高效备战单元测试和最终考试。
1. Quadratic Equations and Inequalities | 二次方程与不等式
n of a quadratic equation ax² + bx + c = 0 can be found using the quadratic formula: x = (–b ± √b² – 4ac) / 2a. The discriminant Δ = b² – e is one repeated real root; if Δ < 0 the roots are complex and occur as a conjugate pair.
二次方程 ax² + bx + c = 0 的解可以通过求根公式 x = (–b ± √b² – 4ac) / 2a 求得。判别式 Δ = b² – 4ac 决定了根的性质：若 Δ > 0，有两个不等实根；若 Δ = 0，有一个重根；若 Δ < 0，则根为共轭复数。
When solving quadratic inequalities such as ax² + bx + c > 0, first find the critical values by solving the corresponding equation, then sketch the graph or use a sign table to determine the intervals where the inequality holds. Remember that multiplying or dividing by a negative number reverses the inequality sign.
解二次不等式如 ax² + bx + c > 0 时，先解对应方程求出临界值，再画出草图或使用符号表确定满足不等式的区间。注意乘除负数时要改变不等号方向。
2. Functions and Transformations | 函数与变换
ite functions such as fg(x) = f(g(x)) are evaluated by applying g first, then f. The inverse function f⁻¹(x) exists only if f is one-to-one, and its graph is a reflection of y = f(x) in the line y = x.
函数 f 将每个输入 x 唯一地映射到一个输出 f(x)。定义域是可能输入的集合，值域是可能输出的集合。复合函数如 fg(x) = f(g(x)) 是先作用 g 再作用 f。反函数 f⁻¹(x) 仅当 f 为单射时才存在，其图像是 y = f(x) 关于直线 y = x 的反射。
on y = f(x): y = f(x) + a translates the graph a units upwards; y = f(x + a) translates it – f(x) stretches vertically by factor a; y = f(ax) stretches horizontally by factor 1/a; y = –f(x) reflects in the x-axis; y = f(–x) reflects in the y-axis.
图像的变换包括平移、伸缩和对称。对函数 y = f(x)：y = f(x) + a 将图像向上平移 a 个单位；y = f(x + a) 向左平移 a 个单位；y = a f(x) 垂直伸缩 a 倍；y = f(ax) 水平伸缩 1/a 倍；y = –f(x) 关于 x 轴对称；y = f(–x) 关于 y 轴对称。
3. Coordinate Geometry: Lines and Circles | 坐标几何：直线与圆
The gradient of a straight line through (x₁, y₁) and (x₂, y₂) is m = (y₂ – y₁) / (x₂ – x₁). The equation of a line can be expressed as y – y₁ = m(x – + c = 0. Parallel lines have equal gradients; perpendicular lines have gradients m₁ × m₂ = –1.
过点 (x₁, y₁) 和 (x₂, y₂) 的直线斜率为 m = (y₂ – y₁) / (x₂ – x₁)。直线方程可写为点斜式 y – y₁ = m(x – x₁) 或一般式 ax + by + c = 0。平行线斜率相等；垂直线斜率满足 m₁ × m₂ = –1。
The equation of a circle with centre (a, b) and radius r is (x – a)² + (y – discriminant: two intersections if Δ > 0, tangent if Δ = 0, and no intersection if Δ < 0.
以 (a, b) 为圆心、半径为 r 的圆的方程为 (x – a)² + (y – b)² = r²。求直线与圆的交点时，将直线方程代入圆方程得到二次方程，利用判别式判断：Δ > 0 有两个交点，Δ = 0 相切，Δ < 0 不相交。
4. Sequences and Series: Arithmetic and Geometric | 数列与级数：等差与等比
An arithmetic sequence has a common difference d: the nth term is uₙ = a + (n – 1)d. The sum of the first n terms is Sₙ = n/2 [2a + (n – the last term. Arithmetic series are used in problems involving constant additive growth.
等差数列有公差 d，第 n 项为 uₙ = a + (n – 1)d。前 n 项和 Sₙ = n/2 [2a + (n – 1)d] 或 n/2 (a + l)，其中 l 是末项。等差数列常用于恒定增量增长的问题。
has a common ratio r: the nth term is uₙ = arⁿ⁻¹. The sum of the first n terms is Sₙ = a(1 – rⁿ) / (1 – r) for r ≠ 1. An infinite geometric series converges to a/(1 – r) when |r| < 1. Applications include exponential growth and decay models.
等比数列有公比 r，第 n 项为 uₙ = arⁿ⁻¹。前 n 项和 Sₙ = a(1 – rⁿ) / (1 – r)（r ≠ 1）。当 |r| < 1 时，无穷等比级数收敛于 a/(1 – r)。应用包括指数增长和衰减模型。
5. Trigonometry: Ratios and Identities | 三角学：比值与恒等式
using the unit circle. Exact values for 30°, 45°, and 60° must be memorised: sin 30° = ½, sin 45° = 1/√2, sin 60° = √3/2; similarly for cos and tan.
在直角三角形中，sin θ = 对边/斜边，cos θ = 邻边/斜边，tan θ = 对边/邻边。任意角的三角函数通过单位圆定义。必须熟记 30°、45° 和 60° 的精确值：sin 30° = ½，sin 45° = 1/√2，sin 60° = √3/2；cos 和 tan 同理。
ct periods and asymptotes; transformations such as y = a sin(bx + c) + d involve amplitude |a|, period 2π/|b|, phase shift –c/b, and vertical shift d.
重要恒等式包括 tan θ = sin θ / cos θ 和 sin² θ + cos² θ = 1。 y = sin x、y = cos x 和 y = tan x 的图像有不同的周期和渐近线；如 y = a sin(bx + c) + d 形式的变换涉及振幅 |a|、周期 2π/|b|、相移 –c/b 和垂直位移 d。
-right-angled triangles: a / sin A = b / sin B = c / sin C for the sine rule; a² = b² + c² – 2bc cos A for the cosine rule. The area formula ½ ab sin C is also essential.
正弦定理和余弦定理将三角学推广到非直角三角形：正弦定理 a / sin A = b / sin B = c / sin C；余弦定理 a² = b² + c² – 2bc cos A。面积公式 ½ ab sin C 也必不可少。
6. Exponential and Logarithmic Functions | 指数与对数函数
The function f(x) = aˣ exponential growth (a > 1) or decay (0 < a < 1). The natural exponential function is y = eˣ 828. Its inverse is the natural logarithm y = ln x, defined for x > 0. The graphs of y = eˣ and y = ln x are reflections in y = x.
函数 f(x) = aˣ（a > 0, a ≠ 1）描述指数增长（a > 1）或衰减（0 < a < 1）。自然指数函数为 y = eˣ，其中 e ≈ 2.71828。其反函数是自然对数 y = ln x，定义域 x > 0。y = eˣ 与 y = ln x 的图像关于 y = x 对称。
hm laws are crucial for equation solving: logₐ (xy) = logₐ x + logₐ y; logₐ (x/y) = logₐ x – ₓ a. When solving exponential equations, take logs on both sides and apply the power rule.
对数运算法则是解方程的关键：logₐ (xy) = logₐ x + logₐ y；logₐ (x/y) = logₐ x – logₐ y；logₐ xⁿ = n logₐ x。换底公式为 logₐ b = logₓ b / logₓ a。解指数方程时，两边取对数并应用幂法则。
7. Differentiation: Techniques and Applications | 微分：技巧与应用
xⁿ⁻¹ for any real n. The sum rule and constant multiple rule apply: d/dx [f(x) ± g(x)] = f'(x) ± g' nctions, the chain rule dy/dx = dy/du × du/dx is essential. The product rule: d/dx(uv) = u'v + uv'; quotient rule: d/dx(u/v) = (u'v – uv') / v².
微分求曲线的斜率。xⁿ 的导数为 n xⁿ⁻¹，对任意实数 n 成立。使用加法法则和常数倍法则：d/dx [f(x) ± g(x)] = f'(x) ± g'(x)。复合函数利用链式法则 dy/dx = dy/du × du/dx。乘积法则：d/dx(uv) = u'v + uv'；商法则：d/dx(u/v) = (u'v – uv') / v²。
At a stationary point, f'(x) = 0. The second derivative f''(x) determines the nature: if f''(x) > 0 it is a local minimum; if f''(x) < 0 it is a local maximum; if f'' ion is used to find equations of tangents and normals, and to solve optimisation problems.
在驻点处，f'(x) = 0。二阶导数 f''(x) 决定驻点性质：若 f''(x) > 0 为极小值点；若 f''(x) < 0 为极大值点；若 f''(x) = 0 需进一步判断。微分用于求切线和法线方程，以及解决最优化问题。
8. Integration: Basics and Definite Integrals | 积分：基础与定积分
Integration is the reverse process of differentiation. The indefinite integral of xⁿ is (xⁿ⁺¹)/(n+1) + C for n ≠ –1. The integral of 1/x is ln|x| + C. Integrals of sums and constant multiples follow directly, and recognising derivatives of standard functions (eˣ, sin x, cos x) is required.
积分是微分的逆过程。xⁿ 的不定积分为 (xⁿ⁺¹)/(n+1) + C（n ≠ –1）。1/x 的积分是 ln|x| + C。和的积分及常数倍可直积，需牢记标准函数（eˣ, sin x, cos x）的导数以用于反求积分。
axis from x = a to x = b. Evaluate it by finding an antiderivative F(x) and computing F(b) – treated correctly. The area between two curves is found by integrating the difference f(x) – g(x).
定积分 ∫ₐᵇ f(x) dx 表示曲线 y = f(x) 与 x 轴在区间 [a, b] 上的带符号面积。计算方法是先求原函数 F(x)，再算 F(b) – F(a)。若图像穿过 x 轴，需分段积分以正确处理正负面积。两曲线间的面积通过积分差 f(x) – g(x) 求得。
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图