📚 Mastering Combined Transformations of Function Graphs | 函数图像组合变换全攻略
Combined transformations are a core topic in coordinate geometry and function analysis. When a single graph is shifted, reflected, and stretched in sequence, the result depends on both the operations and their order. This guide gives you a complete strategy for handling them accurately.
组合变换是坐标几何与函数分析中的核心内容。当一个图像依次经过平移、反射和伸缩时，最终结果既取决于变换类型，也取决于变换顺序。本攻略将为你提供一套完整、准确的解题策略。
1. The Four Basic Transformations | 四种基本变换
Before combining, you must master the four building blocks. Let y = f(x) be the original function. A vertical shift maps f(x) to f(x) + a; a horizontal shift maps f(x) to f(x − a). A vertical reflection maps f(x) to −f(x), while a horizontal reflection maps f(x) to f(−x). A vertical stretch maps f(x) to k·f(x), and a horizontal stretch maps f(x) to f(x/k).
在组合之前，必须先掌握四种基本变换。设 y = f(x) 为原函数。纵向平移将 f(x) 变为 f(x) + a；横向平移将 f(x) 变为 f(x − a)。纵向反射将 f(x) 变为 −f(x)，横向反射将 f(x) 变为 f(−x)。纵向伸缩将 f(x) 变为 k·f(x)，横向伸缩将 f(x) 变为 f(x/k)。
Quick reference table | 快速对照表
| Operation | 操作 | New function | 新函数 | Graph effect | 图像效果 |
| Vertical translation | 纵向平移 | f(x) + a | Move up (a > 0) or down (a < 0) |
| Horizontal translation | 横向平移 | f(x − a) | Move right (a > 0) or left (a < 0) |
| Vertical reflection | 纵向反射 | −f(x) | Reflect in x-axis |
| Horizontal reflection | 横向反射 | f(−x) | Reflect in y-axis |
| Vertical stretch | 纵向伸缩 | k·f(x) | Stretch if |k| > 1; compress if 0 < |k| < 1 |
| Horizontal stretch | 横向伸缩 | f(x/k) | Stretch if |k| > 1; compress if 0 < |k| < 1 |
2. Why Order Matters | 为什么顺序很重要
Unlike simple addition, transformations do not always commute. For example, shifting then stretching horizontally gives a different graph from stretching then shifting. Consider f(x) = x². If you shift right by 2 to get (x − 2)², then stretch horizontally by factor 2, you get ((x/2) − 2)². But if you stretch first to get (x/2)², then shift right by 2, you get ((x − 2)/2)². These are not the same function.
与简单加法不同，变换并不总是可交换的。例如，先平移后横向伸缩与先伸缩后平移得到的图像不同。以 f(x) = x² 为例：先右移 2 得 (x − 2)²，再横向拉伸 2 倍得 ((x/2) − 2)²；但若先拉伸得 (x/2)²，再右移 2 得 ((x − 2)/2)²。这两个函数并不相同。
The central rule is: horizontal transformations inside the argument are applied in reverse order to the x-coordinate. Vertical transformations outside the argument are applied in the natural order to the y-coordinate.
核心规则是：作用于自变量内部（括号内）的横向变换，对 x 坐标而言要按相反顺序执行；作用于函数值外部（括号外）的纵向变换，对 y 坐标而言按自然顺序执行。
3. The "Inside-Out" Principle | “由内向外”原则
For a function written in the form y = a·f(b(x − c)) + d, the transformations are applied to x in this order: horizontal translation first, then horizontal stretch/reflection, then vertical stretch/reflection, then vertical translation. But many textbooks show this differently because the algebraic form is read from the inside outward.
对于形如 y = a·f(b(x − c)) + d 的函数，x 方向变换的代数顺序是：先横向平移，再横向伸缩/反射，最后纵向伸缩/反射，再纵向平移。不过很多教材的表述不同，因为代数式需要从内向外读取。
Recommended order for sketching | 推荐作图顺序
- Step 1: Start with y = f(x).
- Step 2: Apply horizontal translation x → x − c.
- Step 3: Apply horizontal stretch/reflection x → b(x − c).
- Step 4: Apply vertical stretch/reflection y → a·f(b(x − c)).
- Step 5: Apply vertical translation y → a·f(b(x − c)) + d.
- 第一步：从 y = f(x) 开始。
- 第二步：应用横向平移 x → x − c。
- 第三步：应用横向伸缩/反射 x → b(x − c)。
- 第四步：应用纵向伸缩/反射 y → a·f(b(x − c))。
- 第五步：应用纵向平移 y → a·f(b(x − c)) + d。
This order guarantees correctness for both coordinates. It is especially clear when you track a single key point through each step.
这一顺序能保证两个坐标方向都正确。尤其适合通过追踪一个关键点在每一步中的位置来理解。
4. Identifying Transformations from an Equation | 从方程识别变换
Given an equation, rewrite it in the standard form y = a·f(b(x − c)) + d. Then read the parameters directly. The value a controls vertical stretch/reflection; b controls horizontal stretch/reflection; c controls horizontal shift; d controls vertical shift.
给出方程后，先将其改写为标准形式 y = a·f(b(x − c)) + d，然后直接读取参数。a 控制纵向伸缩/反射，b 控制横向伸缩/反射，c 控制横向平移，d 控制纵向平移。
Example: y = 2·√3x − 6 + 1. Factor inside the radical: 3x − 6 = 3(x − 2). So the form is y = 2·√(3(x − 2)) + 1. Thus: horizontal shift right 2, horizontal compression by factor 1/3, vertical stretch by factor 2, vertical shift up 1.
例如：y = 2·√3x − 6 + 1。将根号内因式分解：3x − 6 = 3(x − 2)。因此标准形式为 y = 2·√(3(x − 2)) + 1。于是：横向右移 2，横向压缩为原来的 1/3，纵向拉伸为原来的 2 倍，纵向上移 1。
Common mistake: Treating f(3x − 6) as a shift of 6. Always factor the coefficient of x before reading the shift.
常见错误：把 f(3x − 6) 误认为是平移 6。必须先提出 x 的系数，再读取平移量。
5. Combining Vertical and Horizontal Transformations | 纵向与横向变换的组合
Vertical and horizontal transformations do not interfere with each other. You can apply all vertical changes to the y-coordinate and all horizontal changes to the x-coordinate independently. However, within each direction, order still matters.
纵向和横向变换互不干扰。你可以将所有纵向变化作用于 y 坐标，所有横向变化作用于 x 坐标，二者独立进行。但在同一方向内部，顺序仍然重要。
For vertical transformations, the order is: stretch/reflect first, then translate. This is because the function value is multiplied by a before adding d. For horizontal transformations, the algebra reads from the inside: translate first, then stretch/reflect.
对于纵向变换，顺序是：先伸缩/反射，再平移。因为函数值先乘以 a 再加 d。对于横向变换，代数式从内向外读：先平移，再伸缩/反射。
Example: To sketch y = −2·f(x) + 3, first reflect in the x-axis and stretch vertically by 2, then move up 3. To sketch y = f(2(x − 1)), first shift right 1, then compress horizontally by factor 1/2.
例如：要画 y = −2·f(x) + 3，先作 x 轴反射并纵向拉伸 2 倍，再上移 3。要画 y = f(2(x − 1))，先右移 1，再横向压缩为原来的 1/2。
6. Key Points Method | 关键点法
The most reliable way to sketch a combined transformation is to track key points. Choose intercepts, turning points, and endpoints, then apply each transformation step-by-step.
绘制组合变换图像最可靠的方法是追踪关键点。选取截距、极值点、端点，然后逐步应用每个变换。
Suppose f(x) has a turning point at (3, 4). For y = −2·f(0.5(x − 1)) + 5:
设 f(x) 的一个极值点为 (3, 4)。对于 y = −2·f(0.5(x − 1)) + 5：
- Step 1: Shift right 1 → x becomes 4, y stays 4: (4, 4)
- Step 2: Horizontal stretch by factor 2 → x becomes 8, y stays 4: (8, 4)
- Step 3: Vertical stretch by 2 and reflect → y becomes −8: (8, −8)
- Step 4: Shift up 5 → y becomes −3: (8, −3)
- 第一步：右移 1 → x 变为 4，y 不变：(4, 4)
- 第二步：横向拉伸 2 倍 → x 变为 8，y 不变：(8, 4)
- 第三步：纵向拉伸 2 倍并反射 → y 变为 −8：(8, −8)
- 第四步：上移 5 → y 变为 −3：(8, −3)
This method avoids confusion because you only manipulate one coordinate at a time.
这种方法一次只处理一个坐标，能有效避免混淆。
7. Invariant Points | 不变点
Some points remain fixed under certain transformations. A point on the x-axis stays fixed under a vertical reflection or vertical stretch. A point on the y-axis stays fixed under a horizontal reflection or horizontal stretch. Translations move every point except when the translation amount is zero.
某些点在一些变换下保持不变。x 轴上的点在纵向反射或纵向伸缩下不动；y 轴上的点在横向反射或横向伸缩下不动。除非平移量为零，否则平移会移动所有点。
Invariant points are useful for checking your sketch. For example, under y = −f(x), any x-intercept remains at the same x-coordinate and y = 0. Under y = f(−x), any y-intercept remains unchanged because x = 0 maps to itself.
不变点可用于检查图像。例如，在 y = −f(x) 下，所有 x 截距仍位于相同的 x 坐标且 y = 0。在 y = f(−x) 下，y 截距保持不变，因为 x = 0 映射到自身。
In combined transformations, an invariant point of the overall transformation satisfies both the original and final equations. Intersections of the original graph with the line y = d often remain key reference points.
在组合变换中，整体变换的不变点既满足原方程也满足最终方程。原图像与直线 y = d 的交点往往是重要的参考点。
8. Order of Transformations: Two Valid Approaches | 变换顺序：两种有效方法
There are two commonly taught sequences. Sequence A: translate, stretch, reflect, translate again. Sequence B: stretch, reflect, translate. Both can be correct if applied to the correct form.
通常有两种教学方法。顺序 A：平移、伸缩、反射、再平移。顺序 B：伸缩、反射、平移。只要针对正确的形式，两种都可以。
However, when using the form y = a·f(b(x − c)) + d, the safest sequence is:
然而，使用形式 y = a·f(b(x − c)) + d 时，最安全的顺序是：
Horizontal shift → Horizontal stretch/reflection → Vertical stretch/reflection → Vertical shift
横向平移 → 横向伸缩/反射 → 纵向伸缩/反射 → 纵向平移
This sequence follows the algebraic nesting exactly, so you never need to reverse-engineer the order.
该顺序完全对应代数式的嵌套结构，因此你无需反向推导顺序。
9. Worked Example: Quadratic Function | 案例：二次函数
Sketch y = −2(x − 3)² + 4 starting from f(x) = x². Here a = −2, c = 3, d = 4. There is no b.
从 f(x) = x² 出发，绘制 y = −2(x − 3)² + 4。这里 a = −2，c = 3，d = 4，没有 b。
- Step 1: Shift f(x) right 3 to get y = (x − 3)². Vertex: (3, 0).
- Step 2: Vertical stretch by 2 and reflect in x-axis to get y = −2(x − 3)². Vertex: (3, 0).
- Step 3: Shift up 4 to get y = −2(x − 3)² + 4. Vertex: (3, 4).
- 第一步：将 f(x) 右移 3，得到 y = (x − 3)²。顶点：(3, 0)。
- 第二步：纵向拉伸 2 倍并作 x 轴反射，得到 y = −2(x − 3)²。顶点：(3, 0)。
- 第三步：上移 4，得到 y = −2(x − 3)² + 4。顶点：(3, 4)。
The axis of symmetry is x = 3. The y-intercept: substitute x = 0 → y = −2(9) + 4 = −14. The graph opens downward.
对称轴为 x = 3。y 截距：代入 x = 0 → y = −2(9) + 4 = −14。图像开口向下。
10. Worked Example: Trigonometric Function | 案例：三角函数
Sketch y = 3·sin(2x − π) + 1. Factor the argument: 2x − π = 2(x − π/2). So y = 3·sin(2(x − π/2)) + 1.
绘制 y = 3·sin(2x − π) + 1。因式分解自变量：2x − π = 2(x − π/2)。所以 y = 3·sin(2(x − π/2)) + 1。
Start from y = sin(x):
从 y = sin(x) 开始：
- Step 1: Shift right by π/2.
- Step 2: Horizontal compression by factor 1/2 (period becomes π).
- Step 3: Vertical stretch by 3 (amplitude becomes 3).
- Step 4: Shift up 1 (midline becomes y = 1).
- 第一步：右移 π/2。
- 第二步：横向压缩为原来的 1/2（周期变为 π）。
- 第三步：纵向拉伸 3 倍（振幅变为 3）。
- 第四步：上移 1（中线变为 y = 1）。
Maximum value: 1 + 3 = 4; minimum value: 1 − 3 = −2. Key x-intercepts can be found by solving 3·sin(2x − π) + 1 = 0.
最大值：1 + 3 = 4；最小值：1 − 3 = −2。x 截距可通过解 3·sin(2x − π) + 1 = 0 求得。
11. Common Pitfalls and How to Avoid Them | 常见陷阱与规避方法
Pitfall 1: Reading the horizontal shift incorrectly. For f(2x − 6), some students shift right 6. Correct: factor to get f(2(x − 3)), so shift right 3.
陷阱一：读错横向平移量。 对于 f(2x − 6)，有些学生认为右移 6。正确做法：因式分解为 f(2(x − 3))，所以右移 3。
Pitfall 2: Applying reflection after translation incorrectly. For f(−x + 2), the order matters. Rewrite as f(−(x − 2)), which means shift right 2, then reflect in the y-axis.
陷阱二：先平移后反射时出错。 对于 f(−x + 2)，顺序很关键。改写为 f(−(x − 2))，即先右移 2，再作 y 轴反射。
Pitfall 3: Confusing vertical and horizontal stretch factors. y = f(2x) compresses horizontally, not stretches. y = 2f(x) stretches vertically, not compresses.
陷阱三：混滑纵向与横向伸缩因子。 y = f(2x) 是横向压缩，不是拉伸；y = 2f(x) 是纵向拉伸，不是压缩。
Pitfall 4: Forgetting to track key points. Freehand sketching without tracking at least one point often produces a graph with wrong intercepts.
陷阱四：忘记追踪关键点。 不追踪至少一个点就随手画图，常常导致截距错误。
12. Summary and Exam Strategy | 总结与应试策略
Always start by rewriting the given function into the standard form y = a·f(b(x − c)) + d. Then apply transformations in this order: horizontal shift, horizontal stretch/reflection, vertical stretch/reflection, vertical shift. Track at least one key point and one asymptote or axis.
看到题目后，首先将给定函数改写为标准形式 y = a·f(b(x − c)) + d。然后按以下顺序应用变换：横向平移、横向伸缩/反射、纵向伸缩/反射、纵向平移。至少追踪一个关键点和一条渐近线或对称轴。
Check your final graph with the original function: verify intercepts, maxima/minima, and end behavior. If possible, use a graphing calculator or software to confirm your sketch.
用原函数检验最终图像：验证截距、最大值/最小值以及端点的行为。如果条件允许，使用图形计算器或软件确认你的草图。
With practice, combined transformations become a purely mechanical process. Master the standard form, remember the correct order, and always track key points.
通过练习，组合变换将变成一个纯粹的机械化过程。熟练掌握标准形式，牢记正确顺序，并始终追踪关键点。
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图