📚 IB Mathematics: Direct/Inverse Proportion and Cubic Models | IB数学：正反比关系与三次模型
Proportionality and cubic models form a foundational bridge between algebraic manipulation and real-world interpretation in IB Mathematics. At its core, direct proportion describes a linear scaling relationship between two quantities, while inverse proportion captures an opposing interplay that leads to hyperbolic curves. Cubic models, by contrast, introduce a higher degree of polynomial behaviour, enabling the representation of more complex growth patterns, volume expansions, and rate-of-change dynamics that appear in both Analysis and Approaches (AA) and Applications and Interpretation (AI) syllabi.
正比与反比关系，以及三次模型，构成了IB数学中从代数运算通向现实世界解读的基石桥梁。正比关系描述了两种量之间的线性缩放规律，而反比关系则展现了一种反向变化、形成双曲曲线的相互作用。相比之下，三次模型引入了更高次数的多项式行为，使人们能够表达更复杂的增长模式、体积扩展以及变化率动态，这在“分析与方法（AA）”和“应用与解释（AI）”两套教学大纲中均有涉及。
1. Direct Proportion: The Linear Scaling Principle | 正比关系：线性缩放的基本原理
be in direct proportion if their ratio remains constant. This is written symbolically as y ∝ nt of proportionality. The graph of a direct proportion is always a straight line passing through the origin, with gradient k. If k > 0, the line slopes upward; if k < 0, it slopes downward. This principle is ubiquitous in physics — for example, Hooke' oportional to applied force, and in currency conversion, where the amount received is directly proportional to the amount exchanged.
若变量 y 与 x 的比值为恒定常数，则称二者成正比关系，记作 y ∝ x，即 y = kx，其中 k 为比例常数。正比关系的图象永远是一条经过原点的直线，斜率为 k。当 k > 0 时，直线向上倾斜；当 k < 0 时，直线向下倾斜。该原理在物理学中无处不在——例如胡克定律中弹簧的伸长量正比于施加的力，又如货币兑换中实际收到的金额正比于兑换的金额。
Direct proportion always passes through the origin, since when x = 0, y = 0.
正比关系必过原点，因为当 x = 0 时，y = 0。
The constant k can be found from any point (x₁, y₁) using k = y₁ / x₁, provided x₁ ≠ 0.
比例常数 k 可由任意非零坐标点 (x₁, y₁) 求得：k = y₁ / x₁。
Doubling x doubles y; halving x halves y — this scaling property defines linear proportionality.
x 加倍时 y 加倍，x 减半时 y 减半——这一缩放性质正是线性比例的定义特征。
y ∝ x ⇔ y = kx, k = y / x (x ≠ 0)
2. Inverse Proportion: The Hyperbolic Relationship | 反比关系：双曲型对应关系
Two variables are inversely proportional when their product is constant. Symbolically, y ∝ s relationship is a rectangular hyperbola in the first and third quadrants (for k > 0), with the x-axis and y-axis serving as asymptotes. Unlike direct proportion, doubling x causes y to be halved — ies move in opposite directions. This model is essential in fields such as gas laws (Boyle' nal to volume at constant temperature), and in the relationship between frequency and wavelength of a wave at fixed speed.
当两个变量的乘积恒为常数时，称二者成反比关系，记作 y ∝ 1/x，即 y = k/x 或 xy = k。反比关系的图象是位于第一和第三象限（当 k > 0 时）的等轴双曲线，以 x 轴和 y 轴为渐近线。与正比不同，x 加倍会导致 y 减半——两个量朝相反方向变化。这一模型在气体定律（如玻意耳定律：恒温下压强与体积成反比）以及波动中固定速度下频率与波长之间的关系等场景中至关重要。
ver touches the axes; x = 0 and y = 0 are vertical and horizontal asymptotes respectively.
图象永不触及坐标轴；x = 0 与 y = 0 分别为垂直渐近线和水平渐近线。
From any data point (x₁, y₁), k = x₁y₁ gives the constant of proportionality.
由任意数据点 (x₁, y₁) 可计算比例常数：k = x₁y₁。
As x → ∞, y → 0; as x → 0⁺, y → ∞ — behaviour governed by asymptotic limits.
当 x → ∞ 时 y → 0；当 x → 0⁺ 时 y → ∞——行为由渐近极限支配。
y ∝ 1/x ⇔ y = k/x ⇔ xy = k (k ≠ 0)
3. Distinguishing Direct and Inverse Proportion Graphs | 区分正比与反比关系的图象
Recognising proportionality types from graphs is a common IB examination skill. A straight line through the origin indicates direct proportion. A curve that bends towards both axes without crossing them indicates inverse proportion. However, not all curves through the origin are linear — quadratic and cubic relationships also pass through the origin but are not directly proportional. Therefore, students must check whether the ratio y/x is constant for direct proportion, and whether the product xy is constant for inverse proportion, using tabulated data.
从图象判断比例类型是IB考试中的常见技能。一条经过原点的直线表示正比关系。一条向两轴弯曲且不穿过坐标轴的曲线表示反比关系。然而，并非所有过原点的曲线都是直线——二次和三次关系也经过原点，但并非正比关系。因此，面对表格数据，学生需检查 y/x 是否恒为常数以判断正比，检查 xy 是否恒为常数以判断反比。
| Characteristic | 特征 | Direct Proportion | 正比 | Inverse Proportion | 反比 |
| Equation 形式 | y = kx | y = k/x |
| Graph 图象 | Straight line through origin 过原点直线 | Rectangular hyperbola 等轴双曲线 |
| Constant check 常数检验 | y / x = k | xy = k |
| Scaling behaviour 缩放特性 | x × n ⇒ y × n | x × n ⇒ y ÷ n |
4. Modelling Reality with Direct Proportion | 用正比关系为现实建模
atics, distance travelled at constant speed is directly proportional to time elapsed. When solving such problems, students should identify the given data pair, compute k, and then use the equation to predict values — a three-step procedure that dominates proportional-reasoning examinations.
正比关系出现在大量IB标准的现实情境中。在经济领域，总成本正比于数量（在单价固定时）。在几何中，圆的周长正比于半径：C = 2πr。在运动学中，匀速运动下行驶的距离正比于所经过的时间。解决此类问题时，学生应首先找出给定数据对，计算 k，然后利用方程预测数值——这一三步流程在比例推理类考试中占据主导地位。
Step 1: Identify pair (x₁, y₁) → Step 2: k = y₁/x₁ → Step 3: y = kx for new x
the distance after 2.5 hours, compute d = 80 × 2.5 = 200 km. This simplicity is deceptive — ons often embed proportional reasoning inside more complex contexts, such as density (mass ∝ volume) or electrical resistance (resistance ∝ length of wire).
例如，一辆汽车以恒定速度在3小时内行驶240公里，则 d = 80t。要计算2.5小时后的距离：d = 80 × 2.5 = 200公里。这种简洁性具有欺骗性——IB题目往往将比例推理嵌入更复杂的背景中，例如密度（质量 ∝ 体积）或电阻（电阻 ∝ 导线长度）。
5. Applications of Inverse Proportion in Science and Geometry | 反比关系在科学和几何中的应用
unter. The intensity of light varies inversely with the square of distance from the source — uct rule is invaluable: if x₁y₁ = x₂y₂, then the unknown quantity can be determined without explicitly computing k.
反比关系为IB学生所面临的多种现象建模。光的强度随距离光源距离的平方呈反比变化——这是稍作扩展的平方反比比例。在几何中，完成一项任务所需人数与可用时间成反比。在杠杆中，作用力与距支点的距离成反比。解题时乘积规则非常有效：若 x₁y₁ = x₂y₂，则无需显式计算 k 即可求出未知量。
From xy = k: x₁y₁ = x₂y₂ ⇒ y₂ = x₁y₁ / x₂
Boyle's law: P₁V₁ = P₂V₂ at constant temperature.
玻意耳定律：恒温下 P₁V₁ = P₂V₂。
Work-time problems: time ∝ 1 / (number of workers) if all work at the same rate.
工作量-时间问题：若所有工人工作效率相同，则时间 ∝ 1 / 工人数。
Gravitational force: F ∝ 1 / r² — inverse square law.
万有引力：F ∝ 1 / r²——平方反比定律。
6. Extension: Joint and Mixed Proportionality | 延伸：联合比例与混合比例
In IB Mathematics, proportionality often involves multiple variables simultaneously. Joint proportion occurs when one quantity varies directly as the product of others — for example, the volume of a cylinder varies jointly with the height and the square of the radius: V ∝ r²h. Newton's second law states F ∝ ma. Combined proportionality may mix direct and inverse components: the gravitational force between two masses is proportional to the product of masses and inversely proportional to the square of the distance. These combined models are treated as multi-step proportional problems where each independent variable is varied while holding others fixed.
在IB数学中，比例往往同时涉及多个变量。联合比例指一个量与多个量的乘积成正比——例如圆柱体的体积正比于高度与半径平方的乘积：V ∝ r²h。牛顿第二定律：F ∝ ma。混合比例可能同时含正比和反比成分：两物体间的万有引力正比于质量的乘积，反比于距离的平方。这些组合模型被视为多步骤比例问题，在固定其他变量的前提下逐一分析每个自变量变化所带来的影响。
V ∝ r²h ⇒ V = kr²h; F ∝ (m₁m₂)/r² ⇒ F = G·(m₁m₂)/r²
7. Introduction to Cubic Models: The General Form | 三次模型导论：一般形式
x² + cx + d, where a ≠ 0. The leading coefficient a determines the end behaviour: if a > 0, the graph rises to the right and falls from the left; if a < 0, the reverse occurs. The graph of a cubic has at most two turning points and at most three real roots. Unlike quadratics, cubics do not have a line of symmetry in general, though specific forms may exhibit point symmetry about their inflection point.
三次函数是最高次数为三的多项式，一般形式为 f(x) = ax³ + bx² + cx + d，其中 a ≠ 0。首项系数 a 决定图象的末端行为：当 a > 0 时，图象向右上升、向左下降；当 a < 0 时，方向相反。三次函数图象最多有两个转向点，最多有三个实根。与二次函数不同，三次函数一般没有对称轴，但某些特殊形式可能具备关于拐点的点对称性。
The y-intercept is always d, obtained from f(0).
y 轴截距恒为 d，即 f(0) 的值。
End behaviour: as x → ±∞, the term ax³ dominates all others.
末端行为：当 x → ±∞ 时，ax³ 项支配所有其他项。
A cubic may have 1, 2, or 3 real roots, depending on the discriminant and stationary points.
三次函数可以有1、2或3个实根，具体取决于判别式与驻点情况。
f(x) = ax³ + bx² + cx + d, a ≠ 0
8. Graphical Features: Turning Points and Roots | 图象特征：转向点与根
understanding of their geometric features. The turning points occur where the derivative f' nd minimum. The nature of each turning point can be verified using the second derivative f'' a local minimum, a negative one a local maximum. The point of inflection is found where f''(x) = 0, giving x = −b/(3a); at this point the concavity of the curve changes.
分析三次函数图象需要透彻理解其几何特征。转向点出现在导数 f'(x) = 3ax² + 2bx + c = 0 的位置。解该二次方程即可得到局部极大值和局部极小值的 x 坐标。每个转向点的性质可以用二阶导数 f''(x) = 6ax + 2b 来验证：二阶导数为正则对应局部极小值，为负则对应局部极大值。拐点可通过 f''(x) = 0 求得，即 x = −b/(3a)，该点左右曲率方向发生改变。
Turning points: f'(x) = 0; Inflection point: f''(x) = 0 ⇒ x = −b/(3a)
Number of real roots can be determined by the relative positions of turning points and the x-axis.
实根数目可由转向点与 x 轴的相对位置判定。
If both turning points lie above the x-axis or both below, the cubic has exactly one real root.
若两个转向点同在 x 轴上方或同在 x 轴下方，则三次函数恰有一个实根。
If one turning point lies on the x-axis, a repeated root occurs.
若某一转向点恰在 x 轴上，则出现重根。
9. Factorising and Solving Cubic Equations | 三次方程的因式分解与求解
f f(p) = 0, then (x − p) is a factor. Students then divide the cubic by this linear factor — either by polynomial long division or synthetic division — o procedures. In examination questions, at least one root is often an integer or a simple rational number, making the factor theorem an efficient starting point.
在IB评估中求解三次方程通常从通过因式定理找出一个根开始：若 f(p) = 0，则 (x − p) 是其中一个因式。学生随后用该线性因式去除三次多项式——既可做长除法，也可做综合除法——从而得到一个二次多项式，再用因式分解或求根公式求解。这一策略将三次问题降阶为二次运算。考试题目中至少有一个根通常是整数或简单有理数，因而因式定理是一个高效的突破口。
If f(p) = 0, then f(x) = (x − p)(ax² + qx + r)
Use the rational root theorem to list possible roots: factors of d divided by factors of a.
运用有理根定理列出候选根：d 的因数除以 a 的因数。
Synthetic division (Horner's scheme) provides a compact way to divide and factor simultaneously.
综合除法（霍纳算法）可同时完成除法与因式分解，过程紧凑高效。
Check the discriminant of the resulting quadratic to determine the nature of the remaining roots.
检查所得二次式的判别式，以判定剩余根的性质。
10. Cubic Models in Real-World Contexts | 三次模型在现实情境中的应用
the radius. In biology, the logistic-type growth of populations can be locally approximated by cubic functions over short intervals. In economics, total revenue as a function of price may yield a cubic relationship under nonlinear demand. In engineering, the deflection of a uniformly loaded beam follows a cubic polynomial. IB examination problems often draw from such contexts, giving students data that can be fitted to a cubic regression model using a GDC or other technology.
三次模型是描述非均匀加速或减速增长现象的强力工具。在几何中，球体体积 V = (4/3)πr³ 是半径的三次函数。在生物学中，种群的对数型增长可在较短区间内用三次函数近似表达。在经济学中，总收益对价格的函数在非线性需求下可呈现三次关系。在工程学中，均匀受载梁的挠度遵循三次多项式。IB考试题目经常取材于这类情境，向学生提供可用图形计算器（GDC）或其他技术拟合成三次回归模型的数据。
Vsphere = (4/3)πr³; deflection y(x) = (w₀/24EI)(x⁴ − 2Lx³ + L³x)
evenue function R(x) = −2x³ + 15x² + 36x may reveal a maximum at a certain production level — locating that maximum requires solving R'(x) = 0, an application of differential calculus within a cubic framework.
在拟合三次模型时，学生应从情境中识别因变量与自变量，根据给定点或回归技术求出系数，然后从转向点、根和变化率等角度解释模型意义。例如，一个三次收益函数 R(x) = −2x³ + 15x² + 36x 在某个生产水平上可能达到最大值——求该最大值需要解 R'(x) = 0，这是三次框架内微分学的应用。
11. Connecting Proportionality to Cubic Behaviour | 联系比例关系与三次行为
t proportion, one variable scales linearly with another; in a cubic relationship such as V ∝ erty is a form of power-law proportionality, distinct from simple direct proportion but related through the general concept of variation: y ∝ mining how the dependent variable responds to uniform changes in the independent variable.
一条重要的概念线索将正比关系和三次模型联系在一起。在正比关系中，一个变量随另一个变量线性缩放；而在三次关系（如 V ∝ r³）中，体积随半径的立方缩放。这意味着半径加倍时，体积增大至原来的 2³ = 8 倍。这种三次缩放性质是幂律比例的一种形式，不同于简单的正比，但通过一般的变化概念相联系：y ∝ xⁿ，其中 n 为某个整数。学生应能根据因变量对自变量均匀变化的响应方式，判断图形中 n = 1、n = 2 还是 n = 3。
If doubling x multiplies y by 8, a cubic relationship is likely (n = 3).
若 x 加倍导致 y 变为原来的8倍，则该关系很可能是三次（n = 3）。
If doubling x multiplies y by 4, a quadratic relationship is indicated (n = 2).
若 x 加倍导致 y 变为原来的4倍，则提示二次关系（n = 2）。
If doubling x doubles y, this is direct proportion (n = 1).
若 x 加倍导致 y 加倍，则是正比关系（n = 1）。
12. Exam Strategies and Common Pitfalls | 考试策略与常见误区
Mastery of proportionality and cubic models requires both procedural fluency and conceptual vigilance. A frequent error is assuming a curve through the origin is a line of direct proportion, when in fact it may be quadratic or cubic. Another pitfall is forgetting that inverse proportionality requires the graph to approach but never meet the axes. In cubic problems, students often misidentify the point of inflection as a turning point, or overlook the fact that a cubic with a negative leading coefficient falls to the right. Regular practice with tabulated data, graph interpretation, and word-problem translation will build the robust skill set expected in IB examinations.
掌握比例关系与三次模型，既需要程序上的熟练，也需要概念上的警觉。一个常见错误是误认为经过原点的曲线就是正比直线，而事实可能为二次或三次曲线。另一个陷阱是忘记反比关系要求图象逼近但永不接触坐标轴。在三次函数问题中，学生常常混淆拐点与转向点，或忽略首项系数为负的三次函数向右下方下降这一事实。坚持用表格数据、图象解读和文字题转换进行练习，将能建立IB考试所要求的扎实能力。
| Common Pitfall | 常见误区 | Correct Approach | 正确方法 |
| Assuming any curve through origin is direct proportion | Check y/x is constant |
| Ignoring asymptotes in inverse proportion | Remember x ≠ 0, y ≠ 0 |
| Confusing inflection point with turning point | Inflection: f''(x) = 0; turning: f'(x) = 0 |
| Forgetting to divide by the linear factor | Always factor fully after finding first root |
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图