📚 Unit Circle and Radian Measure | 单位圆与弧度制
The unit circle and radian measure form the foundation of advanced trigonometry in IB Mathematics. Understanding how angles are measured in radians and how the unit circle defines sine, cosine, and tangent is essential for solving problems involving trigonometric functions, identities, and equations.
单位圆与弧度制是IB数学中三角学进阶内容的基础。理解角如何以弧度为单位测量，以及单位圆如何定义正弦、余弦和正切，对于解决涉及三角函数、恒等式和方程的问题至关重要。
1. What is a Radian? | 什么是弧度？
A radian is an angle measure defined in terms of arc length. One radian is the angle subtended at the center of a circle by an arc whose length is equal to the radius of the circle. In other words, if the arc length equals the radius, the angle is exactly 1 radian.
弧度是一种基于弧长来定义的角度度量单位。一弧度是指圆上长度等于半径的弧所对应的圆心角。换句话说，当弧长等于半径时，该角的大小正好为1弧度。
θ = arc length / radius = s / r
corresponds to an angle of 2π radians. This gives the key relationship: 360° = 2π radians.
由于圆的周长是2πr，因此绕圆一整圈对应的角度为2π弧度。这给出了关键关系：360° = 2π 弧度。
2. Converting Between Degrees and Radians | 度数与弧度的转换
adians. To convert from degrees to radians, multiply by π/180. To convert from radians to degrees, multiply by 180/π.
度数与弧度之间的转换利用等价关系 180° = π 弧度。将度数转换为弧度时，乘以 π/180；将弧度转换为度数时，乘以 180/π。
| Degrees | Radians |
| 0° | 0 |
| 30° | π/6 |
| 45° | π/4 |
| 60° | π/3 |
| 90° | π/2 |
| 180° | π |
| 270° | 3π/2 |
| 360° | 2π |
rt 120° to radians: 120 × π/180 = 2π/3. To convert 5π/6 to degrees: (5π/6) × 180/π = 150°.
例如，将120°转换为弧度：120 × π/180 = 2π/3。将 5π/6 转换为度数：(5π/6) × 180/π = 150°。
3. The Unit Circle Definition | 单位圆的定义
point on the unit circle can be described using an angle θ measured counterclockwise from the positive x-axis.
单位圆是半径为1、圆心位于坐标原点的圆，其方程为 x² + y² = 1。单位圆上的点可以用从正x轴逆时针方向测量的角度θ来描述。
For any angle θ, the coordinates of the corresponding point on the unit circle are (cos θ, sin θ). This is the fundamental definition of sine and cosine used in IB mathematics.
对于任意角度θ，单位圆上对应点的坐标为 (cos θ, sin θ)。这是IB数学中正弦和余弦的基本定义。
P(θ) = (cos θ, sin θ)
he radius is 1, the Pythagorean theorem immediately yields the identity cos²θ + sin²θ = 1.
x坐标给出角的余弦值，y坐标给出角的正弦值。由于半径为1，勾股定理立即得出恒等式 cos²θ + sin²θ = 1。
4. Trigonometric Functions on the Unit Circle | 单位圆上的三角函数
cute angles. The tangent function is defined as tan θ = sin θ / cos θ, provided cos θ ≠ 0.
利用单位圆，我们可以为所有实数角度（而不仅仅是锐角）定义正弦和余弦。正切函数定义为 tan θ = sin θ / cos θ，前提是 cos θ ≠ 0。
sin θ is the y-coordinate of the point on the unit circle.
sin θ 是单位圆上点的y坐标。
cos θ is the x-coordinate of the point on the unit circle.
cos θ 是单位圆上点的x坐标。
tan θ is the slope of the line connecting the origin to the point, equal to y/x.
tan θ 是原点与点连线的斜率，等于 y/x。
The reciprocal functions are csc θ = 1/sin θ, sec θ = 1/cos θ, cot θ = 1/tan θ.
倒数函数为 csc θ = 1/sin θ, sec θ = 1/cos θ, cot θ = 1/tan θ。
es are bounded between -1 and 1, we have -1 ≤ sin θ ≤ 1 and -1 ≤ cos θ ≤ 1 for all angles.
由于坐标在-1到1之间，因此对于所有角度都有 -1 ≤ sin θ ≤ 1 和 -1 ≤ cos θ ≤ 1。
5. Exact Values of Special Angles | 特殊角的精确值
Certain angles have exact trigonometric values that appear frequently in exams. These include 0, π/6, π/4, π/3, and π/2, along with their multiples. Memorizing these values is crucial.
某些角度具有精确的三角函数值，这些值在考试中经常出现，包括 0、π/6、π/4、π/3 和 π/2 及其倍数。记住这些值至关重要。
| θ (radians) | sin θ | cos θ | tan θ |
| 0 | 0 | 1 | 0 |
| π/6 | 1/2 | √3/2 | 1/√3 |
| π/4 | √2/2 | √2/2 | 1 |
| π/3 | √3/2 | 1/2 | √3 |
| π/2 | 1 | 0 | undefined |
) = sin(π/6) = 1/2 because the reference angle is π/6 and sine is positive in Quadrant II.
对于其他象限的角度，使用相关的锐角（参考角）并根据象限判断符号。例如，sin(5π/6) = sin(π/6) = 1/2，因为参考角是 π/6，且正弦在第二象限为正。
6. Arc Length and Sector Area | 弧长与扇形面积
One of the most direct applications of radian measure is calculating arc length and sector area. When θ is measured in radians, the formulas simplify beautifully.
弧度制最直接的应用之一就是计算弧长和扇形面积。当θ以弧度为单位时，公式会大大简化。
Arc length: s = rθ
Sector area: A = ½ r²θ
Here, r is the radius and θ is the central angle in radians. These formulas only work in radians; if the angle is given in degrees, you must convert first.
其中r是半径，θ是圆心角（以弧度为单位）。这些公式仅在弧度制下成立；如果角度以度为单位，必须先转换。
ntral angle π/3, the arc length is 6 × π/3 = 2π cm, and the area is ½ × 36 × π/3 = 6π cm².
对于一个半径为6 cm、圆心角为 π/3 的扇形，弧长为 6 × π/3 = 2π cm，面积为 ½ × 36 × π/3 = 6π cm²。
7. The Pythagorean Identity | 毕达哥拉斯恒等式
tant trigonometric identity. Since x = cos θ and y = sin θ satisfy x² + y² = 1, we obtain:
单位圆直接引出了最重要的三角恒等式。由于 x = cos θ 和 y = sin θ 满足 x² + y² = 1，我们得到：
sin²θ + cos²θ = 1
≠ 0) gives tan²θ + 1 = sec²θ. Dividing by sin²θ (when sin θ ≠ 0) gives 1 + cot²θ = csc²θ.
除以 cos²θ（当 cos θ ≠ 0 时）得到 tan²θ + 1 = sec²θ。除以 sin²θ（当 sin θ ≠ 0 时）得到 1 + cot²θ = csc²θ。
trigonometric equations. For example, if sin θ = 3/5 and θ is in Quadrant I, then cos θ = √1 - 9/25 = 4/5.
这些恒等式用于化简表达式、证明其他恒等式以及解三角方程。例如，如果 sin θ = 3/5 且 θ 在第一象限，则 cos θ = √1 - 9/25 = 4/5。
8. Periodicity of Trigonometric Functions | 三角函数的周期性
π. This means sin(θ + 2π) = sin θ and cos(θ + 2π) = cos θ for all θ. Tangent has period π.
因为单位圆每旋转一整圈就会重复，所以正弦和余弦以2π为周期。这意味着对所有θ都有 sin(θ + 2π) = sin θ 和 cos(θ + 2π) = cos θ。正切的周期是π。
The sine function is positive in Quadrants I and II, negative in III and IV.
正弦函数在第一、二象限为正，在第三、四象限为负。
The cosine function is positive in Quadrants I and IV, negative in II and III.
余弦函数在第一、四象限为正，在第二、三象限为负。
The tangent function is positive in Quadrants I and III, negative in II and IV.
正切函数在第一、三象限为正，在第二、四象限为负。
general solution adds multiples of 2π: θ = π/6 + 2πk or 5π/6 + 2πk, where k is an integer.
这种周期性使我们能够找到三角方程的所有解。例如，方程 sin θ = 1/2 的主解为 θ = π/6 和 5π/6，但通解还要加上2π的整数倍：θ = π/6 + 2πk 或 5π/6 + 2πk，其中k为整数。
9. Reference Angles | 参考角
The reference angle is the acute angle between the terminal side of an angle and the x-axis. For an angle θ in standard position, the reference angle α is always between 0 and π/2.
参考角是角的终边与x轴之间的锐角。对于标准位置下的角θ，参考角α总是在0到π/2之间。
| Quadrant | Reference angle |
| I | α = θ |
| II | α = π - θ |
| III | α = θ - π |
| IV | α = 2π - θ |
π/4 (Quadrant II), the reference angle is π - 3π/4 = π/4. Therefore sin(3π/4) = sin(π/4) = √2/2, while cos(3π/4) = -cos(π/4) = -√2/2 because cosine is negative in Quadrant II.
对于 θ = 3π/4（第二象限），参考角为 π - 3π/4 = π/4。因此 sin(3π/4) = sin(π/4) = √2/2，而 cos(3π/4) = -cos(π/4) = -√2/2，因为余弦在第二象限为负。
10. Common Mistakes and Pitfalls | 常见错误与陷阱
Students often lose marks on unit circle questions due to a few recurring errors. Being aware of these pitfalls will help you avoid them.
学生在单位圆问题上经常因几个反复出现的错误而失分。意识到这些陷阱将帮助你避免它们。
in formulas that require radians: always convert to radians when using s = rθ or A = ½r²θ.
在需要弧度制的公式中使用度数：使用 s = rθ 或 A = ½r²θ 时务必先转换为弧度。
Forgetting the signs of trigonometric functions in different quadrants.
忘记三角函数在不同象限的符号。
Confusing the order of coordinates: remember (cos θ, sin θ), not (sin θ, cos θ).
混淆坐标顺序：记住是 (cos θ, sin θ)，而不是 (sin θ, cos θ)。
Using the calculator in the wrong angle mode (DEG vs RAD).
计算器使用错误的角度模式（度 vs 弧度）。
Misidentifying the reference angle for angles greater than 2π or negative angles.
对于大于2π或负角度，错误地确定参考角。
7π/4. Then compute the reference angle as 2π - 7π/4 = π/4, and apply the appropriate sign.
对于负角度，如 -π/4，可先加上2π得到正同界角：-π/4 + 2π = 7π/4。然后计算参考角为 2π - 7π/4 = π/4，并应用相应的符号。
11. Exam Tips and Strategies | 考试技巧与策略
Mastering the unit circle and radian measure is not just about memorization; it is about understanding connections. The most successful students are those who can visualize the unit circle and instantly recall exact values and signs.
掌握单位圆和弧度制不仅仅是记忆，而是要理解其中的联系。最成功的学生是那些能够在脑海中清晰呈现单位圆、并快速回忆精确值和符号的学生。
Draw a quick unit circle before starting trigonometry questions to help guide your reasoning.
在开始三角函数问题前画一个快速单位圆，以帮助指导推理。
When solving equations, always state the general solution unless the question specifies a restricted domain.
解方程时，除非题目限定了定义域，否则要写出通解。
Use the mnemonic "All Students Take Calculus" to remember which functions are positive in each quadrant: All (I), Sin (II), Tan (III), Cos (IV).
用口诀“All Students Take Calculus”来记住各象限为正的函数：第一象限全正、第二象限正弦、第三象限正切、第四象限余弦。
Check whether your answer makes sense by estimating the position of the angle on the unit circle.
通过估计角度在单位圆上的位置来检查答案是否合理。
Practice converting between degrees and radians until it becomes automatic. In IB exams, angles are usually given in radians unless stated otherwise, so become comfortable with radian values like π/6, π/4, π/3, and π/2.
练习度数与弧度的转换，直到变成自然反应。在IB考试中，除非特别说明，角度通常以弧度给出，所以要熟悉 π/6、π/4、π/3 和 π/2 等弧度值。
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图