📚 Calculation Practice for Economics | 经济计算题专项训练
Mastering quantitative skills is essential for success in AQA and IB Economics, where calculation questions can account for a significant portion of your marks. This article provides a structured, bilingual training session covering the core calculations you are likely to encounter — from elasticities and costs to macroeconomic multipliers and index numbers. Each section explains the concept in English, followed by its Chinese equivalent, ensuring clarity for bilingual learners. Practice the steps, learn the formulas, and apply them with confidence.
掌握定量技能对于在 AQA 和 IB 经济学考试中取得成功至关重要，计算题往往占总分的很大比重。本文提供结构化的双语专项训练，涵盖你可能遇到的核心计算——从弹性、成本到宏观经济乘数和指数。每小节先以英文解释概念，紧接着提供对应的中文释义，确保双语学习者能够清晰理解。请练习步骤、熟记公式，并自信地运用它们。
1. Price Elasticity of Demand (PED) | 需求价格弹性
the responsiveness of quantity demanded to a change in price. The basic formula is PED = (% change in quantity demanded) ÷ (% ways use the midpoint method when moving between two points to avoid inconsistent results: % demand; exactly 1, unit elastic. Remember that PED is typically negative due to the law of demand, but we often refer to the absolute value.
需求价格弹性衡量需求量对价格变动的反应程度。基本公式为 PED = 需求量变动百分比 ÷ 价格变动百分比。当在两点之间移动时，始终使用中点法以避免结果不一致：需求量变动 %ΔQd = (Q₂ − Q₁) ÷ [(Q₁ + Q₂)/2] × 100，价格变动同理。PED 绝对值大于 1 表示富有弹性；小于 1 表示缺乏弹性；等于 1 表示单位弹性。请记住，由于需求定律，PED 通常为负值，但我们常使用其绝对值。
2. Income Elasticity of Demand (YED) | 需求收入弹性
come elasticity of demand captures how quantity demanded responds to a change in consumers' income. YED = (% change in quantity demanded) ÷ (% eaning demand falls as income rises. Use the same midpoint percentage change method. This concept helps businesses forecast how sales will shift during economic expansions or contractions.
需求收入弹性反映需求量对消费者收入变动的反应程度。YED = 需求量变动百分比 ÷ 收入变动百分比。正常商品具有正的 YED；奢侈品 YED > 1，必需品 0 < YED < 1。低档商品的 YED 为负，即收入上升时需求下降。使用同样的中点百分比法进行计算。这一概念有助于企业预测经济扩张或收缩期间销售额的变化。
3. Cross Elasticity of Demand (XED) | 需求交叉弹性
nsiveness of demand for one good (A) to a change in the price of another good (B). XED = (% change in quantity demanded of A) ÷ (% rs and ink cartridges). A value close to zero implies the goods are unrelated. XED is crucial for firms when assessing the impact of competitors' pricing strategies.
需求交叉弹性衡量一种商品 (A) 的需求量对另一种商品 (B) 价格变动的反应程度。XED = (A 商品需求量变动百分比) ÷ (B 商品价格变动百分比)。XED 为正表示替代品（如茶与咖啡）；为负表示互补品（如打印机与墨盒）。数值接近于零意味着商品之间不相关。企业在评估竞争对手定价策略的影响时，XED 至关重要。
4. Price Elasticity of Supply (PES) | 供给价格弹性
upply quantifies how much quantity supplied changes in response to a price change. PES = (% change in quantity supplied) ÷ (% ctors are fixed in the short run. A PES > 1 is elastic, PES < 1 is inelastic. Unlike PED, PES is usually positive because higher prices create an incentive to produce more.
供给价格弹性衡量供给量对价格变动的反应程度。PES = 供给量变动百分比 ÷ 价格变动百分比。当企业能够轻松调整产出（如存在闲置产能、库存）时，供给通常富有弹性；而在短期内生产要素固定时则缺乏弹性。PES > 1 表示富有弹性，PES < 1 表示缺乏弹性。与 PED 不同，PES 通常为正，因为更高的价格会激励生产者增加产出。
5. Costs of Production: TC, FC, VC, AC, AVC, MC | 生产成本：总成本、固定成本、可变成本、平均成本等
here Q is output. Average variable cost (AVC) = TVC ÷ Q. Marginal cost (MC) = ΔTC ÷ ΔQ, representing the cost of producing one additional unit. Fixed costs do not vary with output in the short run. In a table or graph, MC often intersects ATC and AVC at their minimum points. Understanding these relationships helps explain a firm’s supply decisions.
掌握成本计算是基础。总成本 (TC) = 总固定成本 (TFC) + 总可变成本 (TVC)。平均总成本 (ATC) = TC ÷ Q，其中 Q 为产量。平均可变成本 (AVC) = TVC ÷ Q。边际成本 (MC) = ΔTC ÷ ΔQ，表示多生产一单位产品所增加的成本。固定成本在短期内不随产量变化。在表格或图形中，MC 通常与 ATC 和 AVC 的最低点相交。理解这些关系有助于解释企业的供给决策。
6. Revenue and Profit Maximisation | 收益与利润最大化
re MR = MC, provided that price exceeds average variable cost in the short run. A common exam task is to complete a revenue and cost table, then identify the profit-maximising output level. If data is discrete, choose the output where MR ≥ MC but the next unit would make MC > MR.
总收益 (TR) = 价格 × 数量。平均收益 (AR) = TR ÷ Q = 价格。边际收益 (MR) = ΔTR ÷ ΔQ。利润 = TR − TC。企业会在 MR = MC 处实现利润最大化，条件是短期内价格高于平均可变成本。常见的考试任务是完成收益和成本表格，然后找出利润最大化的产量水平。如果数据是离散的，应选择使 MR ≥ MC 且下一单位会使 MC > MR 的产量。
7. Market Equilibrium with Linear Equations | 线性方程下的市场均衡
. For example, if Qd = 100 − 2P and Qs = 20 + 3P, then 100 − 2P = 20 + 3P → 5P = 80 → P = 16, Q = 68. After a tax or subsidy, adjust the supply function: for a per-unit tax t, new supply becomes Qs = c + d(P − t) if the tax is on producers. Practise rearranging carefully.
你可能会遇到线性需求和供给函数：Qd = a − bP，Qs = c + dP。求均衡时，令 Qd = Qs 解出 P，再代回求出 Q。例如，如果 Qd = 100 − 2P，Qs = 20 + 3P，则 100 − 2P = 20 + 3P → 5P = 80 → P = 16，Q = 68。在征税或补贴后，需要调整供给函数：对于每单位从量税 t，若向生产者征税，新供给变为 Qs = c + d(P − t)。请仔细练习移项计算。
8. Tax Wedges, Consumer and Producer Surplus | 税收楔子、消费者剩余与生产者剩余
he area under the demand curve and above the market price; producer surplus is the area above the supply curve and below the market price. With a linear model, you calculate surpluses as areas of triangles: ½ × base × height. After a tax, both surpluses shrink, and a deadweight loss triangle appears. Be ready to calculate tax revenue per unit × quantity sold.
间接税会在消费者支付价格 (Pc) 和生产者获得价格 (Pp) 之间形成一个楔子：Pc = Pp + 每单位税额。消费者剩余是需求曲线下方、市场价格上方的区域；生产者剩余是供给曲线上方、市场价格下方的区域。在线性模型中，可将剩余计算为三角形面积：½ × 底 × 高。征税后，两类剩余都会减少，并出现无谓损失三角形。需要能够计算税收收入（每单位税额 × 销量）。
9. The Multiplier and National Income | 乘数与国民收入
C), where MPC is the marginal propensity to consume. Alternatively, k = 1 ÷ (MPS + MPT + MPM), where MPS is the marginal propensity to save, MPT the marginal propensity to tax, and MPM the marginal propensity to import. The total change in GDP = initial injection × multiplier. For the tax multiplier, the formula is −MPC ÷ (1 − MPC). Practice distinguishing between government spending and tax multipliers, as the latter is smaller in absolute value.
乘数效应表明，自主支出的初始变动会带来实际 GDP 更大的最终变动。简单计算公式为 k = 1 ÷ (1 − MPC)，其中 MPC 为边际消费倾向。也可表示为 k = 1 ÷ (MPS + MPT + MPM)，其中 MPS 是边际储蓄倾向，MPT 是边际税收倾向，MPM 是边际进口倾向。GDP 总变动 = 初始注入 × 乘数。税收乘数的公式为 −MPC ÷ (1 − MPC)。注意区分政府支出乘数和税收乘数，后者的绝对值较小。
10. Index Numbers, Inflation, and Unemployment | 指数、通货膨胀与失业
ate is the percentage change in the index between two periods. For weighted indices, multiply each item’s price relative by its weight. The unemployment rate = (number of unemployed ÷ labour force) × 100. The labour force participation rate = (labour force ÷ working-age population) × 100. Real GDP adjusts nominal GDP for inflation: Real GDP = (Nominal GDP ÷ GDP deflator) × 100. Consistent unit usage is vital.
指数使跨时期比较变得简单。第 t 年的价格指数 = (t 年一篮子货品的价值 ÷ 基年一篮子货品的价值) × 100。通货膨胀率是指数在两个时期之间的变动百分比。计算加权指数时，需将每种商品的价格相对值乘以其权重。失业率 = (失业人数 ÷ 劳动力总数) × 100。劳动参与率 = (劳动力人数 ÷ 劳动年龄人口) × 100。实际 GDP 通过通胀调整名义 GDP 得出：实际 GDP = (名义 GDP ÷ GDP 平减指数) × 100。单位使用的一致性至关重要。
11. Comparative Advantage and Terms of Trade | 比较优势与贸易条件
ountry A, the opportunity cost of 1 unit of X is how many units of Y must be sacrificed (e.g., if A can produce 10X or 20Y, the opportunity cost of 1X is 2Y). The country with the lower opportunity cost of X should specialise in X. The terms of trade index = (index of export prices ÷ index of import prices) × 100. A favourable movement in the terms of trade means a country can buy more imports for a given quantity of exports.
当一个国家能够以低于另一国的机会成本生产某种商品时，就具有比较优势。计算机会成本：对于 A 国，生产 1 单位 X 的机会成本是必须牺牲多少单位的 Y（例如，若 A 国可生产 10X 或 20Y，则 1X 的机会成本为 2Y）。生产 X 机会成本较低的国家应专门生产 X。贸易条件指数 = (出口价格指数 ÷ 进口价格指数) × 100。贸易条件改善意味着一国用一定数量的出口可以购买更多的进口品。
12. Formula Summary Table | 公式汇总表
| Concept 概念 | Formula 公式 |
|---|---|
| PED | %ΔQd ÷ %ΔP |
| YED | %ΔQd ÷ %ΔIncome |
| XED | %ΔQdₐ ÷ %ΔPᵦ |
| PES | %ΔQs ÷ %ΔP |
| MC | ΔTC ÷ ΔQ |
| ATC | TC ÷ Q |
| Profit | TR − TC |
| Multiplier (k) | 1 ÷ (1 − MPC) or 1 ÷ (MPS+MPT+MPM) |
| Inflation Rate | [(CPIₜ − CPIₜ₋₁) ÷ CPIₜ₋₁] × 100 |
| Unemployment Rate | (Unemployed ÷ Labour Force) × 100 |
| Terms of Trade | (Export Price Index ÷ Import Price Index) × 100 |
Keep this table handy and practise applying each formula to numerical data.
将这张表格放在手边，练习将每个公式应用于实际数据。
Published by TutorHao | Economics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图