Applications of Secant, Cosecant and Cotangent | 正割、余割与余切的应用

📚 Applications of Secant, Cosecant and Cotangent | 正割、余割与余切的应用

In A-Level Mathematics, the functions secant (sec), cosecant (cosec) and cotangent (cot) are not just algebraic curiosities; they appear regularly in calculus, trigonometric identities and practical problem-solving. This article explores their definitions, key identities, graphs, derivatives, integrals and typical exam applications.

在 A-Level 数学中，正割（sec）、余割（cosec）和余切（cot）不仅仅是代数上的奇巧之函；它们在微积分、三角恒等式以及实际解题中经常出现。本文将探讨它们的定义、关键恒等式、图像、导数、积分以及典型考试应用。

---

1. Definitions and Basic Relationships | 定义与基本关系

The secant, cosecant and cotangent functions are defined as the reciprocals of cosine, sine and tangent respectively:

正割、余割和余切函数分别定义为余弦、正弦和正切的倒数：

sec x = 1 / cos x, cosec x = 1 / sin x, cot x = 1 / tan x = cos x / sin x

For example, sec x is undefined when cos x = 0, i.e. x = π/2 + nπ, where n is an integer.

这些定义在分母不为零时成立。例如，当 cos x = 0，即 x = π/2 + nπ（n 为整数）时，sec x 无定义。

It is also useful to remember that cot x can be written as cos x / sin x, which is the reciprocal of tan x.

同样要记住，cot x 可写成 cos x / sin x，即 tan x 的倒数。

---

2. Pythagorean Identities | 毕达哥拉斯恒等式

three Pythagorean identities involving these functions are derived from sin²x + cos²x = 1.

涉及这些函数的三个毕达哥拉斯恒等式由 sin²x + cos²x = 1 导出。

1 + tan²x = sec²x, 1 + cot²x = cosec²x

identity follows by dividing sin²x + cos²x = 1 by cos²x; the second by dividing by sin²x.

第一个恒等式通过将 sin²x + cos²x = 1 除以 cos²x 得到；第二个则除以 sin²x。

essions and proving other results. For example, sec²x − tan²x = 1 and cosec²x − cot²x = 1.

这些恒等式对于化简表达式和证明其他结果至关重要。例如，sec²x − tan²x = 1 和 cosec²x − cot²x = 1。

---

3. Graphs and Periodicity | 图像与周期性

Each of the three functions has a distinct graph with vertical asymptotes where the original function is zero.

这三个函数各有独特的图像，在原始函数为零处具有垂直渐近线。

x. Its graph has U-shaped branches and asymptotes at x = π/2 + nπ, where n is an integer.

sec x 的周期为 2π，与 cos x 相同。其图像呈 U 形分支，渐近线位于 x = π/2 + nπ，其中 n 为整数。

cosec x also has period 2π, with asymptotes at x = nπ.

cosec x 的周期也为 2π，渐近线位于 x = nπ。

cot x has period π, with asymptotes at x = nπ and zeros at x = π/2 + nπ.

cot x 的周期为 π，渐近线位于 x = nπ，零点位于 x = π/2 + nπ。

ways mark the asymptotes and the range. For example, sec x and cosec x have range (−∞, −1] ∪ [1, ∞).

绘制这些图像时，务必标出渐近线和值域。例如，sec x 和 cosec x 的值域为 (−∞, −1] ∪ [1, ∞)。

---

4. Solving Trigonometric Equations | 解三角方程

Equations involving sec, cosec and cot are solved by converting them to sin, cos or tan, then applying standard techniques.

涉及 sec、cosec 和 cot 的方程通过将其转换为 sin、cos 或 tan，再应用标准方法来求解。

x = 2 for 0 ≤ x < 2π. Since sec x = 1/cos x, we have cos x = 1/2, giving x = π/3 and 5π/3.

例：解 sec x = 2, 0 ≤ x < 2π。由于 sec x = 1/cos x，有 cos x = 1/2，得 x = π/3 和 5π/3。

Example: Solve cot x = √3 for 0° ≤ x < 360°. Since cot x = 1/tan x, tan x = 1/√3, so x = 30° and 210°.

例：解 cot x = √3, 0° ≤ x < 360°。因为 cot x = 1/tan x，tan x = 1/√3，所以 x = 30° 和 210°。

Remember that squaring or multiplying by expressions can introduce extraneous solutions; always check your answers in the original equation.

注意，平方或乘以表达式可能会引入增根；务必在原始方程中检查答案。

---

5. Differentiation | 微分

The derivatives of sec, cosec and cot are standard results that must be memorised.

sec、cosec 和 cot 的导数是必须牢记的标准结果。

d/dx (sec x) = sec x tan x

d/dx (cosec x) = −cosec x cot x

d/dx (cot x) = −cosec²x

hain rule. For example, d/dx (cosec x) = d/dx (1/sin x) = −cos x / sin²x = −cosec x cot x.

这些结果可通过商法则或链式法则从 sin、cos 和 tan 的导数导出。例如，d/dx (cosec x) = d/dx (1/sin x) = −cos x / sin²x = −cosec x cot x。

n composite functions, apply the chain rule: d/dx sec(ax + b) = a sec(ax + b) tan(ax + b).

对于复合函数，应用链式法则：d/dx sec(ax + b) = a sec(ax + b) tan(ax + b)。

---

广告 / Sponsored

6. Integration | 积分

Integrals involving sec, cosec and cot appear frequently in A-Level papers.

涉及 sec、cosec 和 cot 的积分在 A-Level 试卷中经常出现。

∫ sec²x dx = tan x + C, ∫ cosec²x dx = −cot x + C

∫ sec x tan x dx = sec x + C, ∫ cosec x cot x dx = −cosec x + C

Also remember the logarithmic forms:

还要记住对数形式：

∫ tan x dx = ln|sec x| + C, ∫ cot x dx = ln|sin x| + C

∫ sec x dx = ln|sec x + tan x| + C, ∫ cosec x dx = ln|cosec x − cot x| + C

writing the integrand using sin and cos. For example, ∫ cot x dx = ∫ cos x / sin x dx = ln|sin x| + C.

这些结果通过用 sin 和 cos 改写被积函数得到。例如，∫ cot x dx = ∫ cos x / sin x dx = ln|sin x| + C。

When dealing with definite integrals, always consider discontinuities: if the integrand has an asymptote inside the interval, the integral may be improper.

处理定积分时，务必考虑间断点：若被积函数在区间内存在渐近线，该积分可能是反常积分。

---

7. Inverse Functions | 反函数

Each of these functions has an inverse on a restricted domain. The usual conventions are:

这些函数在受限定义域上都有反函数。通常约定如下：

y = arcsec x ⇔ sec y = x, y ∈ [0, π/2) ∪ (π/2, π]

y = arccosec x ⇔ cosec y = x, y ∈ [−π/2, 0) ∪ (0, π/2]

y = arccot x ⇔ cot y = x, y ∈ (0, π)

These inverses are rarely tested at A-Level, but knowing their domains and ranges helps with solving equations and understanding graphs.

这些反函数在 A-Level 中很少考查，但了解其定义域和值域有助于解方程和理解图像。

---

8. Applications in Calculus | 微积分中的应用

r example, ∫ sec³x dx can be computed by integration by parts or using reduction formulas.

sec、cosec 和 cot 常用于对 tan 和 sec 的幂进行积分。例如，∫ sec³x dx 可通过分部积分或递推公式计算。

rn rational expressions in sin and cos into algebraic ones. These substitutions often involve sec and cosec in intermediate steps.

例如，代换 t = tan(x/2) 可将 sin 和 cos 的有理式转化为代数式。这些代换在中间步骤中常涉及 sec 和 cosec。

sec x tan x appear naturally. For instance, if y = ln(sec x + tan x), then dy/dx = sec x.

在参数方程或隐函数求导时，像 sec x tan x 这样的乘积会自然出现。例如，若 y = ln(sec x + tan x)，则 dy/dx = sec x。

This connection makes the logarithmic integral of sec x particularly elegant.

这种联系使得 sec x 的对数积分特别优雅。

---

9. Applications in Physics and Engineering | 物理与工程中的应用

Beyond pure mathematics, these functions describe physical phenomena such as simple harmonic motion, waves and electrical circuits.

在纯数学之外，这些函数描述诸如简谐运动、波动和电路等物理现象。

In mechanics, the horizontal range of a projectile can be expressed using tan and sec; for example, the equation of trajectory often involves tan θ and sec²θ.

在力学中，抛射体的水平射程可用 tan 和 sec 表示；例如，轨迹方程常涉及 tan θ 和 sec²θ。

and the power factor is cos φ. The reciprocal functions appear when analysing reactive power.

在电子学中，交流电路的阻抗可写成 R + jX，其中相位角满足 tan φ = X/R，功率因数为 cos φ。在分析无功功率时会用到这些倒数函数。

In optics, Snell's law n₁ sin θ₁ = n₂

Published by TutorHao | A-Level Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022（同微信）