📚 Devolution in England: Proportional Reasoning and Statistical Models | 英格兰权力下放：比例推理与统计模型
In Edexcel A-Level Mathematics, real-world contexts are frequently used to test core skills in statistics, ratio, percentage change, probability and modelling. This article uses devolution in England as a cross-curricular context. England is the only part of the United Kingdom without a devolved parliament, so its constitutional position provides a useful baseline for numerical comparison. We will build a simplified devolution index and apply standard A-Level mathematical techniques to analyse it.
在 Edexcel A-Level 数学中，真实情境常被用来考查统计、比例、百分比变化、概率和建模等核心技能。本文以英格兰权力下放为跨学科背景。英格兰是英国唯一没有权力下放议会的组成部分，因此其宪法地位为数值比较提供了一个有用的基准。我们将构建一个简化的权力下放指数，并运用标准的 A-Level 数学方法进行分析。
1. Defining a Devolution Index and Data Table | 定义权力下放指数与数据表
To make the political concept measurable, we define a devolution index as the number of policy areas that have been devolved to a UK nation. The data below are illustrative and designed for mathematical practice only. In reality, devolution arrangements are complex and cannot be reduced to a single number.
为了使政治概念可量化，我们将权力下放指数定义为某一英国构成国拥有的已下放政策领域数量。以下数据仅为教学示意，实际权力下放安排更为复杂，不能简化为单一数字。
| Country 国家 | Population (millions) 人口（百万） | Devolution Index 权力下放指数 |
|---|---|---|
| England 英格兰 | 56.3 | 0 |
| Scotland 苏格兰 | 5.5 | 12 |
| Wales 威尔士 | 3.1 | 8 |
| Northern Ireland 北爱尔兰 | 1.9 | 10 |
The index for England is set to 0 because England has no separate devolved legislature. The other nations have positive values that reflect their broader devolved powers in this simplified model.
英格兰的指数设定为 0，因为英格兰没有独立的权力下放立法机构。其他构成国在此简化模型中具有正值，反映其更广泛的权力下放。
2. Ratios: Comparing England with Other Regions | 比例：英格兰与其他地区的比较
A ratio compares two quantities of the same kind. The devolution index of England is 0, while Scotland has 12. Therefore the ratio of England to Scotland is 0 : 12, which simplifies to 0 : 1. For Wales the ratio is 0 : 8, and for Northern Ireland it is 0 : 10. In every case, the ratio shows that England has no devolved policy areas under this index, whereas each other nation has a positive score.
比例用于比较两个同类量。英格兰的权力下放指数为 0，苏格兰为 12。因此英格兰与苏格兰的比例为 0 : 12，简化为 0 : 1。英格兰与威尔士的比例为 0 : 8，与北爱尔兰为 0 : 10。在所有情况下，该比例都表明英格兰在此指数下没有下放政策领域，而其他每个构成国都有正数得分。
England : Scotland = 0 : 12 = 0 : 1
This use of ratio highlights a key feature of devolution in England: the absence of a distinct devolved settlement comparable to those in Scotland, Wales and Northern Ireland.
这一比例用法凸显了英格兰权力下放的一个关键特征：缺乏与苏格兰、威尔士和北爱尔兰相当的分权安排。
3. Percentage Shares of Total Devolved Powers | 下放权力总量的百分比份额
England directly, since division by zero is undefined. Instead, we can express each region' UK devolved powers. The total is 0 + 12 + 8 + 10 = 30. Scotland accounts for 12 ÷ 30 × 100% = 40%. Wales accounts for 8 ÷ 30 × 100% ≈ 26.7%. Northern Ireland accounts for 10 ÷ 30 × 100% ≈ 33.3%. England accounts for 0%.
由于英格兰的权力下放指数为 0，我们无法直接计算相对于英格兰的百分比增减，因为除以零无定义。相反，我们可以将每个地区的指数表示为全英下放权力总量的百分比。总量为 0 + 12 + 8 + 10 = 30。苏格兰占 12 ÷ 30 × 100% = 40%。威尔士占 8 ÷ 30 × 100% ≈ 26.7%。北爱尔兰占 10 ÷ 30 × 100% ≈ 33.3%。英格兰占 0%。
Percentage share = (Index ÷ Total index) × 100%
This percentage allocation is a standard A-Level technique for comparing parts of a whole. It shows that even though England has the largest population, its share of devolved powers in this index is nil.
这种百分比分配是比较整体中各部分的标准 A-Level 方法。它表明，尽管英格兰人口最多，但在此指数中其下放权力份额为零。
4. Mean and Median of Devolution Scores | 权力下放指数的平均数与中位数
The mean is the sum of all values divided by the number of values. For the four UK countries, the mean devolution index is calculated as follows.
平均数是所有数值之和除以数值个数。对于英国四个构成国，权力下放指数的平均数计算如下。
Mean = (0 + 12 + 8 + 10) ÷ 4 = 30 ÷ 4 = 7.5
10) ÷ 2 = 9. The median is less affected by the extreme England value of 0 than the mean.
要找到中位数，将得分按升序排列：0, 8, 10, 12。因为有四个数值，中位数是第二个和第三个数值的平均值：(8 + 10) ÷ 2 = 9。与平均数相比，中位数受英格兰极端值 0 的影响较小。
Median = (8 + 10) ÷ 2 = 9
Comparing the mean of 7.5 and the median of 9 shows that the distribution is skewed by the zero value for England.
比较平均数 7.5 与中位数 9 可以看出，英格兰的零值使分布产生了偏斜。
5. Range, Variance and Standard Deviation | 极差、方差与标准差
sures the average squared deviation from the mean. Using the mean of 7.5, we calculate the variance as follows.
极差是最大值与最小值之差。此处极差为 12 − 0 = 12。方差衡量与平均数偏差平方的平均值。使用平均数 7.5，方差计算如下。
Variance = [(0−7.5)² + (12−7.5)² + (8−7.5)² + (10−7.5)²] ÷ 4
= [56.25 + 20.25 + 0.25 + 6.25] ÷ 4 = 83 ÷ 4 = 20.75
The standard deviation is the positive square root of the variance.
标准差是方差的正平方根。
Standard
Published by TutorHao | A-Level Mathematics Revision Series | aleveler.com 更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图