AS Further Maths Unit 1 Mark Scheme Jan20 Key Concept Review | AS进阶数学单元1 2020年1月评分方案知识点精讲

📚 AS Further Maths Unit 1 Mark Scheme Jan20 Key Concept Review | AS进阶数学单元1 2020年1月评分方案知识点精讲

The January 2020 AS Further Mathematics Unit 1 examination assessed core pure topics such as complex numbers, matrices, roots of polynomials, series, proof by induction, numerical methods, and coordinate systems. This article reviews the key concepts and common marking points from the mark scheme, providing a bilingual guide for students aiming to master these essential techniques.

2020年1月的AS进阶数学第一单元考试涵盖了复数、矩阵、多项式根、级数、归纳法证明、数值方法以及坐标系等核心纯数主题。本文基于评分方案，梳理重要知识点与常见得分点，为中英双语学习者提供精讲指南。

1. Complex Numbers: Argand Diagram and Modulus-Argument Form | 复数：阿尔冈图与模-辐角形式

l part x on the horizontal axis and the imaginary part y on the vertical axis. The modulus |z| le formed with the positive real axis, usually taken in the principal range −π < θ ≤ π.

复数 z = x + iy 可以在阿尔冈图上表示，实部 x 位于横轴，虚部 y 位于纵轴。模 |z| 表示该点到原点的距离，辐角 θ 是从正实轴量起的角度，通常取主值范围 −π < θ ≤ π。

The modulus is calculated as |z| = √x² + y² ent satisfies tan θ = y/x, with careful quadrant adjustment to obtain the principal value.

|z| = √x² + y², arg(z) = θ where tan θ = y/x

模的计算公式为 |z| = √x² + y²，辐角满足 tan θ = y/x，并需根据象限调整得到主值。

Multiplication in polar form: |z₁z₂| = |z₁||z₂| ₁z₂) = arg(z₁) + arg(z₂) (mod 2π). Division follows similarly, with arguments subtracting.

极坐标形式下的乘法：|z₁z₂| = |z₁||z₂|，辐角相加 arg(z₁z₂) = arg(z₁) + arg(z₂)（模 2π 意义下）。除法类似，辐角相减。

The complex conjugate z̄ = x − iy satisfies |z̄| = |z| and arg(z̄ multiplying or dividing complex numbers and when solving equations with real coefficients.

共轭复数 z̄ = x − iy 满足 |z̄| = |z| 且 arg(z̄) = −arg(z)。在处理乘除运算以及求解实系数方程时，共轭复数非常有用。

---

2. Solving Polynomial Equations with Complex Roots | 求解含复数根的多项式方程

If a polynomial has real coefficients, any non-real complex roots must occur in conjugate pairs. This is a key property used in examination questions to find unknown coefficients or to construct polynomials from given roots.

若多项式的系数均为实数，任何非实复数根必成共轭对出现。这是考试中求解未知系数或由给定根构造多项式时常用的关键性质。

and the product is αβ = a² + b². The corresponding quadratic is x² − (sum)x + product = 0.

α + β = 2a, αβ = a² + b²

对于根为 α = a + bi 和 β = a − bi 的二次方程，根的和为 2a，积为 a² + b²。对应的二次方程为 x² − (和)x + 积 = 0。

When one complex root is given, the conjugate root is automatically known. Use the sum and product relations to find the coefficients of the polynomial, often by expanding (x − α)(x − β).

当已知一个复数根时，其共轭根也自然得知。利用和与积的关系，通过展开 (x − α)(x − β) 即可求出多项式的系数。

Cubic and quartic equations follow similar logic: real coefficients imply that non-real roots appear in conjugate pairs, reducing the number of unknown factors.

三次和四次方程遵循同样的逻辑：实系数意味着非实根成对出现，从而减少了待定因子的数量。

---

广告 / Sponsored

3. Matrices: Determinants, Inverses, and Transformations | 矩阵：行列式、逆与变换

r if det(A) = 0, and non-singular if the determinant is non-zero, guaranteeing an inverse.

det(A) = ad − bc

2×2 矩阵 A = [a b; c d] 的行列式为 ad − bc。若 det(A) = 0，矩阵是奇异的；若行列式非零，则矩阵非奇异，且存在逆矩阵。

) [d −b; −c a]. This formula is essential for solving matrix equations and linear systems.

A⁻¹ = 1/(ad − bc) [d −b; −c a]

非奇异 2×2 矩阵的逆矩阵为 A⁻¹ = (1/det(A)) [d −b; −c a]。该公式是求解矩阵方程和线性方程组的基础。

os θ −sin θ; sin θ cos θ]. Reflection in the line y = (tan θ)x can be expressed similarly.

Rotation: [cos θ −sin θ; sin θ cos θ]

矩阵也可表示几何变换。绕原点逆时针旋转 θ 角的矩阵为 [cos θ −sin θ; sin θ cos θ]。关于直线 y = (tan θ)x 的反射也可以用类似形式表达。

When combining transformations, the order of matrix multiplication matters: the transformation applied second is written on the left. Always multiply matrices in the correct sequence.

组合变换时，矩阵乘法的顺序至关重要：后进行的变换写在左侧。务必按正确顺序进行矩阵乘法。

---

4. Solving Linear Systems Using Inverse Matrices | 用逆矩阵解线性方程组

X = [x; y], and B is the constant matrix. If det(A) ≠ 0, the unique solution is X = A⁻¹B.

AX = B ⇒ X = A⁻¹B

含有两个未知数的两个线性方程可写作矩阵形式 AX = B，A 为系数矩阵，X = [x; y] 为未知数矩阵，B 为常数矩阵。如果 det(A) ≠ 0，则唯一解为 X = A⁻¹B。

First check that det(A) ≠ 0 to confirm the system has a unique solution. Then compute A⁻¹ using the inverse formula and multiply by B. Examiners often award marks for correct determinant, inverse, and final multiplication.

首先检查 det(A) ≠ 0，以确认方程组有唯一解。然后利用逆矩阵公式计算 A⁻¹，并与 B 相乘。阅卷人通常会给行列式、逆矩阵和最终乘法步骤对应的分数。

solutions or infinitely many solutions. In AS Unit 1, questions typically focus on the unique solution case, but awareness of geometric interpretation (parallel or coincident lines) is still valuable.

若 det(A) = 0，方程组可能无解或有无穷多解。在AS第一单元中，问题通常集中在唯一解的情形，但了解几何解释（直线平行或重合）仍然很有价值。

---

5. Roots of Polynomials: Sums and Products | 多项式根的和与积关系

hese relations allow evaluation of symmetric expressions without solving for the roots explicitly.

α + β = −b/a, αβ = c/a

对于二次方程 ax² + bx + c = 0，根为 α 和 β，根的和为 α + β = −b/a，积为 αβ = c/a。这些关系能够在不解出具体根的情况下求值对称表达式。

he elementary symmetric sums are: Σα = α+β+γ = −b/a, Σαβ = αβ+βγ+γα = c/a, and αβγ = −d/a.

α+β+γ = −b/a, αβ+βγ+γα = c/a, αβγ = −d/a

对于三次方程 ax³ + bx² + cx + d = 0，根为 α, β, γ，基本对称和为：Σα = α+β+γ = −b/a，Σαβ = αβ+βγ+γα = c/a，αβγ = −d/a。

cubics, α² + β² + γ² = (α+β+γ)² − 2(αβ+βγ+γα). Use these to find values like Σα² or Σ 1/α.

常见考点包括恒等式 α² + β² = (α+β)² − 2αβ，以及三次方程中 α² + β² + γ² = (α+β+γ)² − 2(αβ+βγ+γα)。利用这些可求 Σα² 或 Σ1/α 等表达式。

When given a new root related to the original ones (e

Published by TutorHao | Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022（同微信）