📚 A-Level Maths Worksheet: Quadratic & Cubic Curves – Top Scoring Techniques | A-Level数学练习：二次与三次曲线——高分技巧
Mastering quadratic and cubic curves is essential for A-Level success, as these functions appear in core pure mathematics, mechanics, and problem-solving contexts. This worksheet-style guide breaks down key concepts, curve sketching techniques, algebraic manipulation, and calculus tools you need to score top marks. By working through each section and pairing theory with exam-style questions, you will build the confidence and fluency required to tackle any curve-related problem.
掌握二次与三次曲线是A-Level数学高分的基础，因为这类函数贯穿纯数、力学和问题求解。本练习式指南将拆解关键概念、曲线草图技巧、代数变形与微积分工具，助你斩获高分。通过逐节学习并将理论对照真题练习，你将建立起处理任何曲线问题的信心与流畅度。
1. Quadratic Curves: Shape and Key Features | 二次曲线：形状与关键特征
try is x = -b/(2a). Recognising these features instantly helps you sketch accurate curves.
二次函数的一般式为 y = ax² + bx + c，其中 a ≠ 0。图像为抛物线。若 a > 0，抛物线开口向上且存在最小值点；若 a < 0，则开口向下且为最大值点。y轴截距为 (0, c)，对称轴为 x = -b/(2a)。快速识别这些特征有助于你精确描绘曲线。
The coefficient a controls the width of the parabola. A larger |a| makes the curve steeper, while a smaller |a| it wider. When a = 0, the function is no longer quadratic, so always check this condition.
系数 a 决定抛物线的宽度。|a| 越大曲线越陡，越小则越平缓。当 a = 0 时方程不再是二次函数，因此务必检查该条件。
2. Discriminant and Root Types | 判别式与根的类型
The discriminant Δ = b² – tangent to the x-axis). If Δ < 0, there are no real roots, and the parabola lies entirely above or below the x-axis.
判别式 Δ = b² – 4ac 无需解方程即可揭示根的性质。若 Δ > 0，二次方程有两个不同的实根，图像与x轴交于两点。若 Δ = 0，则有一个二重实根（与x轴相切）。若 Δ < 0，则无实根，抛物线完全位于x轴上方或下方。
In an exam, you can use the discriminant to find the range of parameters for which a line intersects a curve, or to prove that a quadratic is always positive. For example, if a > 0 and Δ < 0, the quadratic is always positive.
考试中可利用判别式求直线与曲线相交的参数范围，或证明某二次式恒正。例如，当 a > 0 且 Δ < 0 时，二次式恒大于零。
Δ = b² – 4ac
3. Vertex and Line of Symmetry | 顶点与对称轴
/(2a). The y-coordinate is then obtained by substitution. In completed-square form y = a(x – h)² + k, the vertex is (h, k), and the line of symmetry is x = h.
二次函数的顶点即转折点，可通过配方法或公式 x = -b/(2a) 求得，再代入求y坐标。在完全平方形式 y = a(x – h)² + k 中，顶点为 (h, k)，对称轴为 x = h。
mmediately gives the minimum or maximum value of the function. For instance, y = 2(x + 3)² – 5 has a minimum value of –5 when x = –3. Always check the sign of a to confirm whether it is a minimum or maximum.
该形式可直接给出函数的最小或最大值。例如 y = 2(x + 3)² – 5 在 x = –3 处取得最小值 –5。始终检查 a 的正负以确认是极小还是极大。
4. Factorising and Sketching Quadratics | 因式分解与画二次曲线草图
When a quadratic factorises as (px + q)(rx + s), the roots are x = –q/p and x = – metry to ensure the shape is correct. Mark the axis of symmetry and label the coordinates.
当二次式可分解为 (px + q)(rx + s) 时，根为 x = –q/p 和 x = –s/r。画草图时标出根、y轴截距和顶点。利用对称性确保形状正确。标出对称轴并注明坐标。
l find the vertex by completing the square, and the roots via the quadratic formula: x = [–b ± √b² – 4ac]/(2a). Always draw a smooth U-shaped or ∩-shaped curve, never a V-shape.
若二次式无法因式分解，仍可通过配方法求顶点，并用求根公式 x = [–b ± √b² – 4ac]/(2a) 求根。始终绘制光滑的U形或∩形曲线，切勿画成V形。
5. Cubic Curves: Basic Shapes | 三次曲线：基本形状
x² + cx + d, with a ≠ 0. The graph of a cubic is a continuous curve with one or two turning points. If a > 0, the curve generally rises from left to right, having a shape like an 'S' or a single turning point. If a < 0, it falls from left to right.
三次函数形式为 y = ax³ + bx² + cx + d，a ≠ 0。其图像是一条连续曲线，具有一或两个转折点。当 a > 0 时，曲线从左到右整体上升，呈倒'N'形或单个转折点；当 a < 0 时则从左到右下降。
gin and has no turning points, only a point of inflection at (0,0). Variations like y = (x – p)(x – q)(x – r) show three distinct real roots, while repeated factors create tangency or inflection.
最简单的三次函数 y = x³ 经过原点且无转折点，仅在 (0,0) 处有一个拐点。像 y = (x – p)(x – q)(x – r) 这样的形式显示三个不同实根，而重复因子则产生切点或拐点。
6. Factor Theorem and Sketching Cubics | 因式定理与画三次曲线草图
To factorise a cubic, first use the factor theorem: if f(p) = 0, then (x – r comparing coefficients to obtain a quadratic factor, then factorise further if possible.
分解三次多项式时，先应用因式定理：若 f(p) = 0，则 (x – p) 是一个因式。通过尝试常数项的正负因子找到一个因式后，利用多项式除法或比较系数法得出二次因式，再进一步分解。
When sketching, start by marking the x-intercepts (roots) and the y-intercept (d). Determine the end behaviour from the sign of a. Then use calculus to locate turning points, or simply note the shape from the factors. Join the points with a smooth continuous curve, avoiding sharp corners.
画草图时，先标出x轴截距（根）和y轴截距 (d)。根据 a 的符号确定两端走势。然后用微积分求转折点位置，或直接从因式推断形状。用光滑连续曲线连接各点，避免出现尖角。
7. Repeated Roots and Point of Inflection | 重根与拐点
If a cubic has a repeated factor like (x – x = p and does not cross it. This creates a turning point on the axis. If the factor is (x – p)³, the curve has a point of inflection at x = p while crossing the axis.
若三次函数含有 (x – p)² 这样的重复因式，曲线在 x = p 处与x轴相切而不穿过。这产生一个在轴上的转折点。若是 (x – p)³ 因式，则在 x = p 处存在一个拐点且穿过x轴。
For a point of inflection, the gradient may not be zero – flection point, but for others the tangent may have a non-zero slope. Use the second derivative test: if f''(x) changes sign, it is an inflection point.
对于拐点，梯度不一定为零——y = x³ 在拐点处梯度为零，但对于其他函数，该点切线斜率可能不为零。可利用二阶导数检验：若 f''(x) 变号，则为拐点。
8. Transformations of Curves | 曲线变换
Understanding transformations helps you quickly sketch related functions. Common transformations include: f(x) + a (vertical shift), f(x + a) (horizontal shift), a f(x) (vertical stretch/compression), f(ax) (horizontal stretch/compression), –f(x) (reflection in x-axis), and f(–x) (reflection in y-axis).
理解变换有助于快速绘制相关函数图像。常见的变换有：f(x) + a（垂直平移）、f(x + a)（水平平移）、a f(x)（垂直伸缩）、f(ax)（水平伸缩）、–f(x)（关于x轴对称）、f(–x)（关于y轴对称）。
When applying multiple transformations, perform them in the correct order: horizontal shifts, stretches, and reflections inside the bracket act on x before any vertical operations outside the bracket. Always write the transformed coordinate (x', y') in terms of (x, y).
应用多个变换时须按正确顺序：括号内的水平平移、伸缩和反射先作用于 x，然后才进行括号外的垂直操作。始终将变换后的坐标 (x', y') 用原 (x, y) 表示。
y = a f(b(x + c)) + d
9. Solving Equations Graphically | 图形解方程
For quadratics and cubics, rearranging into a shape you can sketch is key. For example, x³ – 3x – 1 = 0 can be solved by finding where y = x³ – 3x meets y = 1.
图解法通过绘制两条曲线求交点来解方程 f(x) = g(x)。处理二次与三次曲线时，关键是将方程转化为可草绘的形式。例如 x³ – 3x – 1 = 0 可通过求 y = x³ – 3x 与 y = 1 的交点来解。
You can also solve by rearranging into a quadratic form, such as x⁴ – check which method is quicker. Exam questions frequently ask you to estimate roots from a graph or deduce the number of solutions.
也可通过换元转化为二次形式，比如 x⁴ – 3x² + 2 = 0，令 t = x² 得到关于 t 的二次方程，但始终要考虑哪种方法更快。考题常要求根据图像估算根或推断解的个数。
10. Using Derivatives for Turning Points | 利用导数求驻点
e for x. For a quadratic, this gives the unique vertex. For a cubic, you will obtain up to two stationary points. Use the second derivative, d²y/dx², to classify them as maximum, minimum, or point of inflection.
对于任意多项式曲线，通过求导找到驻点。令一阶导数 dy/dx = 0 并解出 x。对于二次函数，这直接给出唯一顶点；对于三次函数，最多可得两个驻点。利用二阶导数 d²y/dx² 判定其是极大值、极小值还是拐点。
gn change of the first derivative around the point to confirm an inflection. Remember to substitute x back into f(x) for the y-coordinate.
若二阶导数为正，该点为极小值点；为负则为极大值点。若 d²y/dx² = 0，需检查该点两侧一阶导数的符号变化以确认拐点。记得将 x 代回 f(x) 求得 y 坐标。
11. Common Mistakes and Exam Tips | 常见错误与考试技巧
Many students lose marks by forgetting the inequality sign when interpreting the discriminant, sketching the wrong shape for a negative cubic, or mismanaging the order of transformations. Always label your axes, intercepts, and turning points clearly. When using a calculator, check your factorisation by expanding.
许多学生因解释判别式时忘记不等号方向、画错负三次曲线形状或混淆变换顺序而失分。务必清晰标注坐标轴、截距和转折点。使用计算器后，通过展开验证因式分解的正确性。
Another pitfall is assuming all cubics have two turning points – they don't always. Always compute dy/dx to confirm. Also, when a cubic is written in factorised form with a repeated root, ensure you draw the curve tangent to the x-axis, not crossing.
另一易错点是以为所有三次曲线都有两个转折点——事实并非如此。务必计算 dy/dx 加以确认。此外，当三次函数以因式分解形式给出且含有重根时，确保绘制曲线与x轴相切而非穿过。
12. Practice Questions Strategy | 练习题策略
To excel, work through a mixture of pure skill drills and applied problems. Start with basic factorisation and completing the square. Then tackle finding intersections, range of values for a given number of roots, and sketching combined transformations. Finally, challenge yourself with problems linking quadratics and cubics to inequalities and calculus.
想要脱颖而出，需混合练习纯技能训练与应用题。从基本因式分解和配方法入手；接着处理求交点、给定根个数求参数范围以及绘制组合变换图像；最后挑战将二次、三次曲线与不等式和微积分结合的题目。
Create a checklist for each curve type: domain, y-intercept, roots, turning points, shape, asymptotes (if any). Use past papers to time yourself and identify weak spots. Redraw sketches from memory and explain them aloud – this reinforces understanding.
为每种曲线类型制作检查清单：定义域、y轴截距、根、转折点、形状、渐近线（若有）。使用历年真题计时并识别薄弱环节。凭记忆重绘草图并大声讲解——这能巩固理解。
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022（同微信）
或截图后用「扫一扫 → 相册」选择本图